页数:38页文件大小:6.84 MB来源: 物理化学ppt课件
本课件为可逆电池的热力学与电极电势部分,先由电动势计算电池反应的摩尔吉布斯能变、熵变与反应热,讨论电动势温度系数的意义;随后说明电动势的产生机理与界面电势差,给出标准氢电极、电极电势与能斯特方程,最后讲解化学电池与浓差电池电动势的计算。
10-8Thermodynamics ofreversible cell2004 (c) Dale Carnegie & Associates, Inc.1.Calculationon equilibriumconstant
Motivation Question:Is there any thermal effect when agalvanic cell is working?
a.(ΔrG )T,P=-Wf=-nEFb. When all the compositions that take part in thereaction are in the standard states,ΔrGm=-ZE FTogether with, ΔrGm=-RTlnKaThat gains,E= lnKaKa=exp( )
2、Representation of theelectromotive forceGeneral reaction of cell:cC + dD = gG + hHFrom the thermodynamic equation of thereaction, the ΔrGmof the reaction abovecan be calculated as follows:ΔrGm=ΔrGm+RTln
Together with, (ΔrGm)T,P=-zEFthat gains,E=E-ln=E-lnExplain:Relating to solid or liquid,a=1;relating togas,a=f/p ,if gas is ideal gas, a=p/ p .
Example:Negative H2(p1) 2H+(aH+)+2e-Positive Cl2(p2)+2e-2Cl-(aCl-)Cell reaction:H2(p1)+Cl2(p2)=2H+(aH+)+2Cl-(aCl-)From the thermodynamic equation of the reaction, the ΔrGm ofthe reaction above can be calculated as follows:ΔrGm=ΔrGm+RTlnThenE1=E-ln
3.Determination ofthermodynamic functions
:temperature coefficient ofthe electromotive force, that is, E isa function of temperature.
At constant temperature, the thermal effect fora reversible cell can be gotten by the following:ET=1.01845-4.05×10-5(T-293.15)-9.5×10-7(T-293.15)2+1×10-8(T-293.15)3
Calculation on EoWe can consult the standardelectrode potentials in the appendixand get the standard electromotiveforce by this:
10-9 Mechanism of producingelectromotive force1.The composition of EThe electromotive force equals to the sum ofpotentials on the interface among different phases.
2.Production of diffusionpotentialDiffusion potential is arisen by the direct contactof two kinds of solutions or the same kind ofsolution with different concentrations which isalso called interface potential.Diffusion potential is mainly produced by thedifference of ionic transfer velocity. If cationstransfer to the cathode more rapidly than anionstransferred to the anode, then there should bemore positive charge in the cathode area andthe potential difference can be formed.
A salt bridge can avoid the formation of thediffusion potential because the two solutions donot contact directly with each other but contactthe salt bridge. Whereas the transfer speed forthe cation and anion in the salt bridge is almostthe same such as KCl or NH4NO3.
3.Formation of contactpotentialContact potential is resulted from thedirect contact between two different kindsof metals on the interface.Different metals have different ionizationenergy.The easier the metal loses electrons, themore positive charge it will carry.Then the stable potential difference on theinterface between two metals can beformed.
4.Potential between electrodeand solutionPotential between the electrode and solution is a sortof potential which is formed by the direct contact of thesolid metal electrode and metal ionic solution.When the metal is inserted into the solution, metalions on the surface are polarized by water moleculesto enter the solution.Then the metal electrode carries the negative chargeand the solution near the electrode possesses thepositive charge because of the polarized metal ions.
10-10 Electrode potential1. Standard hydrogen electrode
The structure ofthe standard hydrogenelectrodeHere the inertplatinum electrodeis present in contactwith the hydrogengas at 100 KPa(unless specified)and hydrogen ionsat unit activity in thesolution.
The half-cell reaction:2H++2e-H2It is assumed that the electrodepotential of standard hydrogenelectrode is zero.
2. The standard electrodepotential
The determining cell potential is 0.792 V.Negative: H2(g)-2e→2H+(aq)Positive:Zn2+(aq)+2e→Zn(s)Overall:H2(g)+Zn2+(aq)→2H+(aq)+Zn(s)Thecellreactionisnon-spontaneousbecausezincismorereactivethanhydrogen,soE<0.Thenweget
3.Nernst equationNegative: H2(g)-2e→2H+(a=1)Positive:Cu2+(a)+2e→Cu(s)Overall:H2(g)+Cu2+(a)→2H+(a=1)+Cu(s)
This is Nernst equation of the electrodepotential which is used to calculate thearbitrary electrode potential at anyconcentration, where is the standardelectrode potential and Z is the number ofelectrons lost or gained by the substance.
10-11 Calculation on E fordifferent types of cells版权所有,2004.1.29 (c) Dale Carnegie & Associates, Inc.
Concentration cell1. Single-liquid concentration cellA single-liquid concentration cell is a kind of cell inwhich there is only one solution and the cellreaction is not a chemical reaction but is adiffusion from the higher concentration to thelower.Negative: H2(P1)-2e→2H+(m)Positive:2H+(m)+2e→H2(P2)Overall:H2(P1)→H2(P2)
The standard states for two hydrogenelectrodes are the same, so =0The electromotive force for a single-liquid concentration cell has nothingto do with the concentration of theelectrolytic solution, but is related tothe concentration of the electrodematerial.
2. double-liquid concentrationcellA double-liquid concentration cell is akind of cell in which there are twosolutions and the cell reaction is not thechemical reaction, but the diffusion fromthe higher concentration to the lower.Negative: Ag-e→Ag+(a1)Positive:Ag+(a2)+e→AgOverall:Ag+(a2)→Ag+(a1)
Since the activity coefficient for an ion cannot be determined exactly, the electromotiveforce for a double-liquid concentration cell isnot so accurate as that of the single-liquidconcentration cell.
10-12 Applications of determination ofthe electromotive force1. Judge the tendency of reactionsThe less the standard electrode potential,the stronger the ability of reduction.
2. Calculate the solubilityproduct of insoluble saltDesign a galvanic cell according to thedissolving equilibrium, calculate the solubilityproduct using the standard electrode potentials.Example: Calculate Kspfor the following reaction.AgI(s)=Ag++I-Negative: Ag-e→ Ag+Positive:AgI+e→Ag+I-
下载地址:{{downurl}}
{{{a}}}
{{#b}}{{{b}}}
{{/b}} {{/title}} {{#nolog}}登陆注册
{{/nolog}} {{#djsx}}点我刷新
{{/djsx}} {{#gocz}} {{/gocz}} {{#ffqr}} {{/ffqr}}