首页生物学微生物学微生物学 08 Chapter 7 Microbial Genetics.ppt

08 Chapter 7 Microbial Genetics.ppt

页数:57页文件大小:796.0 KB来源: 微生物学ppt课件

本课件先讲微生物生长的概念与真核原核细胞周期,随后展开群体生长的指数增长与四期生长曲线、总细胞计数与活菌计数等测定方法、恒化器连续培养,再讲温度、氧、pH与水分活度的影响,最后是抗细菌抗病毒与抗真菌药物。

第七章封面页,标明本章主题为微生物的生长规律与控制方法
本章概要页,列出生长概述、群体生长、生长测定、连续培养、环境影响、生长控制、病毒控制与真菌控制八节
核心概念页,指出生长为细胞成分的增加并可用细胞总数、活菌数或细胞量来研究
查看本课件的文字版(共 57 页,供检索与复制)

第1页:第七章 微生物的生长与控制

第七章 微生物的生长与控制

第七章封面页,标明本章主题为微生物的生长规律与控制方法

图示要点:Chapter 7Microbial Growth and Growth control

第2页:本章概要

本章概要

7.1 Overview of Cell Growth7.2 Population Growth 7.3 Measurement of Growth7.4 Continuous Culture: The Chemostat 7.5 Effect of Environment on Growth7.6 Growth Control 7.7 Viral Control7.8 Fungal ControlChapter outline

第3页:本章核心概念

本章核心概念

  • Concepts
  • Microbial growth is defined as an increase in cellular constituents and may result in an increase in a microorganism’s size, population number, or both.
  • A wide variety of techniques can be used to study microbial growth by following changes in the total cell number, the population of viable microorganisms, or the cell mass.
  • Solid objects can be sterilized by physical agents such as heat and radiation; Liquids and gases are sterilized by heat, radiation, and filtration through the proper filter.
  • A knowledge of methods used for microbial control is essential for personal and public safety.

第4页:微生物生长概述

微生物生长概述

  • 7.1 Overview of microbial growthThe bacterial cell is a synthetic machine that is able to duplicate itself. The processes involve as many as 2000 chemical reactions of a wide variety of types
  • Energy transformations.
  • Biosynthesis of small molecules--the building, blocks of macromolecules-as well as the various cofactors and coenzymes needed for enzymatic reactions.

第5页:生长的定义

生长的定义

Growth may be generally defined as a steady increase in all of the chemical components of an organism. Growth usually results in an increase in the size of a cell and frequently results in cell division.Growth definition

第6页:真核细胞的生活周期

真核细胞生活周期的各时相:下表列出G1、S、G2与M四个时相的主要事件。

真核细胞生活周期各时相
时相主要事件
G1细胞生长的主要阶段,细胞增大;是把细胞生长与基因组复制分隔开的间隙期
S进行基因组复制的时相
G2细胞为复制后的基因组分离做准备,包括微管合成与DNA凝聚成染色体;是把染色体复制与分裂分隔开的间隙期
M分裂期,微管装置组装并用于把姐妹染色体拉向两极

第7页:两类细胞周期的比较

两类细胞周期的比较

细胞周期对比图,并列展示真核细胞的G1SG2M与原核细胞的G1RD周期

图示要点:Eukaryotic cell:Prokaryotic cell:G1 S G2 MG1R D

第8页:二分裂

二分裂

  • Most bacterial cells reproduce asexually by binary fision, a process in which a cell divides to produce two nearly equal-sized progeny cells. Three processes
  • Increase in cell size (cell elongation)
  • DNA replication
  • Cell divisionBinary fision

第9页:

第10页:群体生长

群体生长

  • 7.2 Population Growth
  • Growth is defined as an increase in the number of microbial cells in a population.
  • Growth rate is the change in cell number or cell mass per unit time.
  • The interval for the formation of two cells from one is called a generation.
  • The time required for this to occur is called the generation time.

第11页:指数生长

指数生长

A growth experiment beginning with a single cell having a doubling time of 30 min is presented. This pattern of population increase, where the number of cells doubles during each unit time period, is referred to as exponential growth.Exponential Growth

第12页:世代时间的计算

世代时间的计算

  • N = N02nN = final cell number. N0= initial cell number, and n = number of generations.
  • n= ( log N0− log N ) /log 2 = ( log N0− log N ) / 0.301= 3.3 (log N− log N0) .
  • The generation time g of the cell population is calculated as t / n, where t is simply the hours or minutes of exponential growth.Calculating Generation Times

第13页:群体生长周期

群体生长周期

Growth Cycle of PopulationsA typical growth curve for a population of cells can be divided into several distinct phases called the lag phase, exponential phase, stationary phase, and death phase.

第14页:生长曲线的四个时期

生长曲线的四个时期

  • Growth curve of bacteria
  • Lag Phase
  • Exponential Phase
  • Stationary Phase
  • Death Phase

第15页:延滞期

延滞期

Lag PhaseWhen a microbial population is inoculated into a fresh medium, growth usually does not begin immediately but only after a period of time called the lag phase, which may be brief or extended depending on the history of the culture and growth conditions.This happens because for growth to occur in a particular culture medium the cells must have a complete complement of enzymes for synthesis of the essential metabolites not present in that medium.

第16页:指数期

指数期

Exponential PhaseIt is a consequence of the fact that each cell divides to form two cells, each of which also divides to form two more cells, and so on. Most unicellular microorganisms grow exponentially, but rates of exponential growth vary greatly. In general, prokaryotes grow faster than eukaryotic microorganisms

第17页:稳定期

稳定期

If a single bacterium continued to grow exponentially for 48 hr, produce a population that weighed about 4000 times the weight of Earth! This is particularly impressive because a single bacterial cell weighs only about one-trillionth (10− l2) of a gram.Stationary PhaseAn essential nutrient of the culture medium is used up or some waste product of the organism builds up in the medium to an inhibitory level and exponential growth ceases,or both.

第18页:衰亡期

衰亡期

If incubation continues after a population reaches the stationary phase, the cells may remain alive and continue to metabolize, but they may also die. If the latter occurs, the population is said to be in the death phase.Death Phase

第19页:生长的测定

生长的测定

测定方法导览页,指出可通过细胞数目或细胞质量的变化衡量群体生长

Population growth is measured by following changes in the number of cells or weight of cell mass.7.3 Measurement of Growth

第20页:总细胞计数

总细胞计数

The number of cells in a population can be measured by counting a sample under the microscope, either on samples dried on slides or on samples in liquid. With liquid samples, special counting chambers must be used.Total Cell CountDirect microsopic counting procedure using the Petroff-Hausser counting chamber.

第21页:活菌计数

活菌计数

The usual practice, which is the most valid statistically, is to count colonies only on plates that have between 30 and 300 colonies. To make a 10-fold (10−1) dilution, one can mix 0.5 ml of sample with 4.5 ml of diluent, or 1.0 ml sample with 9.0 ml diluent.Viable Counting method

第22页:平板计数法

平板计数法

The usual way to perform a viable count is to determine the number of cells in the sample capable of forming colonies on a suitable agar medium. There are two ways of performing a plate count: the spread plate method and the pour plate method.In either case the sample must usually be diluted before plating.

第23页:

第24页:平板计数的误差来源

平板计数的误差来源

  • The number of colonies obtained in a viable count depends not only on the inoculum size but also on the suitability of the culture medium and the incubation conditions used; It also depends on the length of incubation.
  • The length of incubation.
  • Some tiny colonies may be missed during the counting.
  • The incubation conditions (medium, temperature, time).
  • Key dilutions must be prepared.Sources of Error in Plate Counting

第25页:比浊测定

比浊测定

A cell suspension looks cloudy (turbid) to the eye because cells scatter light passing through the suspension. The more cells present, the more light scattered and hence the more turbid the suspension.Turbidimetric Measurements of Cell Number

第26页:

第27页:连续培养

连续培养

A continuous culture is essentially a flow system of constant volume to which medium is added continuously and from which continuous removal of any overflow can occur. Once such a system is in equilibrium, cell number and nutrient status remain constant, and the system is said to be in steady state.7.4 Continuous Culture: The Chemostat

第28页:恒化器

恒化器

The most common type of continuous culture device used is a chemostat, which permits control of both the population density and the growth rate of the culture. Both parameters can be set by the experimenter.The Chemostat

第29页:恒化器装置

恒化器装置

Chemostat used for continuous cultures. Rate of growth can be controlled either by controlling the rate at which new medium enters the growth chamber or by limiting a required growth factor in the medium.Continuous culture of microorganisms

第30页:营养浓度与生长速率

营养浓度与生长速率

Relationship among nutrient concentration, growth rate(solid line),and growth yield(dashed line)in a batch culture(closed system). At low nutrient concentrations both growth rate and growth yield are affected.

第31页:恒化器的稳态关系

恒化器的稳态关系

Steady-state relationships in the chemostat. The dilution rate is determined from the flow rate and the volume of the culture vessel.Thus,with a vessel of 1000ml and a flow rate through the vessel of 500ml/hr, the dilution rate would be 0.5hr-1.Note that at high dilution rates, growth cannot balance dilution, and the population washes out. Note also that although the population density remains constant during steady state, the growth rate (doubling time)can vary over a wide range. Thus, the experimenter can obtain populations with widely varying growth rates without affecting population density.

第32页:恒化器的实验用途

恒化器的实验用途

Even over rather wide ranges, any desired growth rate can be obtained in the chemostat by simply varying the dilution rate. •A practical advantage to the chemostat is that a population may be maintained in the exponential growth phase for long periods, for days and even weeks. The experimenter using the chemostat can have such cells available at any time.Experimental Uses of the Chemostat

第33页:环境对生长的影响

环境对生长的影响

The activities of microorganisms are greatly affected by the chemical and physical conditions of their environments. Understanding environmental in fluences helps us to explain the distribution of microorganisms in nature and makes it possible for us to devise methods for controlling microbial activities and destroying undesirable organisms. •Four main factors :Temperature, pH, water availability, and oxygen.7.5 Effect of Environment on Growth

第34页:温度对生长的影响

温度对生长的影响

Bacteria grow over a range of temperatures; they do not reproduce below the minimum growth temperattire nor above the maximum growth temperature. Within the temperature growth range there is an optimum growth temperature at which bacterial reproduction is fastest.Effect of temperature on bacterial growth rate

第35页:酶的Q10温度系数

酶的Q10温度系数

Q10说明页,指出在适宜温度范围内温度每升高十摄氏度酶活性约加倍

Enzymes exhibit a Q10so that within a suitable temperature range the rate of enzyme activity doubles for every 10' C rise in temperature.

第36页:微生物的温度类型

微生物的温度类型

温度类群页,按最适生长温度分为嗜冷、嗜温、嗜热与极端嗜热四类

Microorganisms are classified as psychrophiles, mesophiles.thermophiles, and extremethemophilesbased on their optimal growth temperature.

第37页:氧对生长的影响

氧对生长的影响

Effect of oxygen concentration on the growth of various bacteria in tubes of solid medium.(a) Obligate aerobes-growth occurs only in the short distance to which the oxygen diffuses into the medium.(b) Facultative anaerobes growth is best near the surface, where oxygen is available, but occurs throughout the tube.(c) Obligate anaerobes-oxygen is toxic, and there is no growth near the surface. (d) Aerotolerant anaerobes-growth occurs evenly throughout the tube but is not better at the surface because the organisms do not use oxygen. (e) Microaerophiles, aerobic organisms that do not tolerate atmospheric concentrations of oxygen-growth occurs only in a narrow band of optimal oxygen concentration

第38页:酸碱度与微生物类群

酸碱度与微生物类群

pH适应页,指出细菌宜中性、真菌宜酸性而放线菌宜碱性

图示要点:Bacteria Neutral conditionFungi Acidic conditionActinomycetes Alkaline condition

第39页:水分活度

水分活度

The water activity of a solution is 1/100 the relative humidity of the solution (when expressed as a percent), or it is equivalent to the ratio of the solution's vapor pressure to that of pure water.Water activity

第40页:生长的最低水分活度

生长的最低水分活度

  • aw = P solution/ P waterApproximate lower awlimits for microbial growth
  • 0.90 –1.00 for most bacteria, most algae and some fungi as Basidiomycetes,Mucor, Rhizopus.
  • 0.75 for Halobacterium, Aspergillus…
  • 0.60 for some saccharomyces species

第41页:质壁分离

质壁分离

If the concentration of solutes, such as sodium chloride, is higher in the surrounding medium (hypertonic), then water tends to leave the cell. The cell membrane shrinks away from the cell wall (an action called plasmolysis), and cell growth is inhibited.Normal cellPlasmolyzed cellWater activity

第42页:生长控制的定义

生长控制的定义

7.6 Growth ControlDefinitions:Sterilization–the process of destroying all forms of microbial life on an object or in a material.Disinfection–the process of destroying vegetative pathogens but not necessary endospores.Antisepsis –chemical disinfection of skin, mucous membranes or other living tissues

第43页:原核微生物的控制

原核微生物的控制

  • Many antibiotics active against prokaryotes are also produced by prokaryotes.
  • Include the aminoglycosides, the macrolides, and the tetracyclines. Many of these antibiotics have major clinical applications.
  • The tetracyclines and the β-lactam antibiotics are the two most important groups of antibiotics in the medical field.Prokaryote Control

第44页:氨基糖苷类抗生素

氨基糖苷类抗生素

  • Contain amino sugars bonded by glycosidic linkage to other amino sugars .
  • Inhibiting protein synthesis at the 30S subunit of the ribosome.
  • Including streptomycin and its relatives, kanamycin, gentamicin, and neomycin , are used clinically against gram-negative Bacteria.Aminoglycoside antibioticsStructure of kanamycin, an aminoglycoside antibiotic, an aminoglycoside antibiotic.The site of modification by anN-acetyltransferase, encoded by a resistance plasmid, is indicated.

第45页:大环内酯类抗生素

大环内酯类抗生素

  • Contain large lactone rings connected to sugar moieties.
  • Include erythromycin, oleandomycin, spiramycin, and tylosin.
  • Acts as a protein synthesis inhibitor at the level of the 50S subunit of the ribosome.Macrolide antibioticsStructure of erythromycin, a typical macrolide antibiotic.

第46页:四环素类

四环素类

  • The tetracyclines inhibiting almost all gram-positive and gram-negative Bacteria.
  • Tetracycline is a protein synthesis inhibitor.
  • It interferes with 30S ribosomal subunit function.TetracyclinesStructure of tetracyclineand important derivatives.

第47页:病毒的控制

病毒的控制

  • Viruses actually use the host cell machinery to perform their metabolic functions. Therefore, most attempts at chemical control of viruses result in toxicity for the host.
  • Several agents are more toxic for the virus than the host, and there are a few agents produced by the host that specifically target viruses.
  • There are several classes of chemotherapeutic agents that have been shown to be clinically effective in controlling viral replication.7.7 Viral Control

第48页:抗病毒化疗药物

抗病毒化疗药物

  • The most successful and commonly used agents for antiviral chemotherapy are the nucleoside analogs. The first compound to gain universal acceptance in this category was azidothymidine(AZT), Azidothymidine is chemically related to thymidine but is a dideoxy derivative, AZT inhibits HIV. Because the normal host cell function of DNA replication is targeted, these drugs almost always exhibit some level of host toxicity.
  • Several other chemicals work at the level of viral polymerase.
  • A relatively novel class of antiviral drugs are the protease inhibitors.Antiviral Chemotherapeutic Agents

第49页:抗病毒化合物

抗病毒化合物

抗病毒化合物图版,列出作用于病毒复制不同环节的化学药物

图示要点:Antiviral chemotherapeutic compounds

第50页:干扰素

干扰素

Interferons are antiviral substances produced by many animal cells in response to infection by certain viruses. They are low-molecular-weight proteins (17,000 MW) that prevent viral multiplication in normal cells by stimulating the production of antiviral proteins.•There are three molecular types, IFN-α, produced by leukocytes; IFN-β, produced by fibroblnsts; and IFN-γ, produced by immune cells known as lymphocyles.Interferon

第51页:真菌的控制

真菌的控制

Since fungi are Eukarya, much of their cellular machinery is the same as in higher animals and humans, and so chemotherapeutic agents that affect metabolic pathways in fungi often affect corresponding pathways in host cells. This results in drug toxicity in higher animals. Thus, many antifungal drugs can be used only for topical (surface) applications. •Some drugs are selectively toxic for fungi. Drugs for fungal treatment are becoming increasingly important as fungal infections in immunosuppressed individuals become more prevalent.7.8 Fungal Control

第52页:麦角甾醇抑制剂

麦角甾醇抑制剂

Two major groups of antifungal compounds work by interacting with ergosterol or inhibiting its synthesis. In most fungi, ergosterol replaces the cholesterol component found in higher eukaryotic cell membranes.Ergosterol InhibitorsSites of action of some antifungal chemotherapeutic agents. Because fungi are eukaryotic cells, antibacterial antibiotics are generally ineffective.

第53页:

第54页:其他抗真菌药物

其他抗真菌药物

  • A number of other antifungal drugs interfere with fungus-specific structures and functions. Several drugs such as the polyoxins inhibit cell wall synthesis by interfering with chitin biosynthesis.
  • Other drugs inhibit folate biosynthesis, interfere with DNA topology during replication, or, like griseofulvin, disrupt microtubule aggregation during mitosis.
  • Some very effective antifungal drugs also have other biological applications. For example, vincristine, vinblastin, and toxol are effective antifungal agents and have known anticancer properties.Other Antifungal Agents

第55页:复习题(一)

复习题(一)

  • What is the difference between the growth rate constant (k) of an organism and its generation time (g)?
  • Describe the growth cycle of a population of bacterial cells from the time this population is first inoculated into fresh medium. How can the growth pattern differ when it is measured by total count or by viable count?REVIEW QUESTIONS

第56页:复习题(二)

复习题(二)

复习题续页,要求说明单细胞形成可见菌落的过程、活菌计数原理与恒化器的独立调节

图示要点:3.Describebrieflytheprocessbywhichasinglecelldevelopsintoavisiblecolonyonanagarplate.Withthisexplanationasabackground,describetheprinciplebehindtheviablecountmethod.4.Howcanachemostatregulategrowthrateandcellnumbersindependently?5.Listthreechemicalclassesofcompatiblesolutesproducedbyvariousmicroorganisms.Listatleasttwothingstheyallhaveincommon.

第57页:复习题(三)

复习题(三)

复习题续页,涉及嗜酸与嗜碱微生物的异同及判断某化学物可否作防腐剂与消毒剂

图示要点:6.ConcerningthepHoftheenvironmentandofthecell,inwhatwaysareacidophilesandalkaliphilesdifferent?Inwhatwaysaretheysimilar?7.Whattestswouldyouperformtodecidewhetherachemicalagentcouldbeusedasanantiseptic?Asadisinfectant?Somechemicalsservebothpurposes.Describethepropertiesofsuchachemicalandgiveanexample.

顶部目录