首页力学固体力学弹性力学 21 Torsion of Prismatical Bars1.PPT

21 Torsion of Prismatical Bars1.PPT

页数:22页文件大小:409.0 KB来源: 弹性力学ppt课件

本课件围绕等截面直杆的扭转展开,用半逆解法建立等截面直杆扭转问题的应力函数与边界条件,给出扭转剪应力与扭转角的求解思路。页面按板书顺序逐页呈现推导过程与结论,方便对照教材复习、自查解题步骤与公式来源。

等截面直杆的扭转目录页,依次列出等截面直杆的扭转、扭转问题的薄膜比拟、椭圆截面杆的扭转等各节内容
等截面直杆的扭转页,例:图示为等截面直杆(不计体力),两端平面内受方向相反的两个力偶作用,取如图所示的坐标系,求应力分量
分析如下,由材料力学可知页,本页为等截面直杆的扭转的公式推导与板书图示
查看本课件的文字版(共 22 页,供检索与复制)

第1页:本章导读与目录

10 Torsion of Prismatical Bars10.1 Stresses and displacements10.2 Membrane analogy10.3 Elliptic bars in torsion10.4 Rectangular bars in torsion

第2页:等截面直杆的扭转

例:图示为等截面直杆(不计体力),两端平面内受方向相反的两个力偶作用,取如图所示的坐标系,求应力分量。如何计算?method10.1 Stresses and displacements Consider a straight prismaticalbar twisted by two oppositecouples, each with moment M, onthe end planes of the bar.

第3页:分析如下,由材料力学可知

分析如下:由材料力学可知,杆件横截面上有剪应力τzx、τzy,其他应力分量为零,即σx=σy=σz=τxy=0,体力X=Y=Z=0 We shall solve the problem in terms of stresses and apply thesemi - inverse method.

Being hinted by the stress distributiongiven in mechanics of materials for a circular shaft,we assumethat only the torsional stresses are different from zero, whichother stress components vanish.将上述应力分量代入平衡微分方程:Substituting these into differential equations

第4页:first two of Eqs.show th

(1)(2)(3)由(3)得:由(1)、(2)可知,τzx、τzy是x、y的函数The first two of Eqs.show that the torsional stressτzx、τzyare function of x and y only.

第5页:将上述表达式代入相容方程

或写成:将上述表达式代入相容方程:Rewritten as由微分理论可知,一定存在一个函数φ(x,y)使得:, there exists a certain function so that

第6页:

第7页:前四式自然满足,最后两式

前四式自然满足,最后两式为:将代入上式这说明:, must be constant

第8页:杆件侧面,边界条件

  • 杆件侧面:边界条件=0,X=Y=Z=0代入边界前两式恒满足,第三式为:Consider the boundary conditions On the lateral surface

The first two Eqs. Are identically satisfiedwhile the third equation reduces to

第9页:以上边界条件可写

So:所以,以上边界条件可写为:Since:on the boundary of a cross - section,we have Shows that must be constant along the boundary of a cross - section

第10页:常数如何取

常数如何取?Since所以在应力函数φ上增加或减少一个常数,对应力分量无影响,可取φs=0(在单连域实心柱的情况下)the stress components are not affected by addition ofa constant to . , in the case of simplyconnected , for simplicity, we may takethe boundary value of as zero.在多连域情况下,每个边界上的φ为常数,但每个常数并不相同,只能取其中一个边界的φ为零.In the case of multiply connected , theconstant values of on different boundary curves maydiffer from each other. , the value of can betaken as zero along only one of the boundary curves,while the values of on all other boundary curvesmust be determined by t

第11页:杆件端面(上端

  • 杆件端面(上端):边界条件=m=0 n=-1代入边界条件得:且两端的面力必须合成为力偶:On either end plane (see the upper one)Since th

e surface force components must composeda couple with moment M, it is required that

第12页:验证如下边界条件

验证如下边界条件:

第13页:φB为边界上A,B点的值

φA、φB为边界上A、B点的值,取零,所以同理,可证明:WhereφA、φBare the values ofφat two points A and B on theboundary, which must be zero.

第14页:其中的一项用分部积分

其中的一项用分部积分:φA、φB为边界上A、B点的值,取零,所以WhereφA、φBare the values ofφat two points A and B on theboundary, which must be zero.

第15页:其中的一项用分部积分(续)

同理所以:

第16页:其中的一项用分部积分(续2)

Thus归纳To sum up:等截面直杆的扭转问题最终归结为求应力函数φ(x,y),使它满足且φs=0,然后由下列公式求应力分量:To sum up,in a torsion problem, if we can find a functionφwh satisfies ,φs=0, ,then,the torsionalstresses can be found.

第17页:求位移分量,(将应力分量代入物理方程

求位移分量:(将应力分量代入物理方程)Now derive the formulas for displacement components.Substitution of stress components into physical equations.将几何方程代入上述表达式,得:Substitution of geometrical equations.

第18页:

第19页:u0,v0,ωx,ωy,ωz是积分常数

u0,v0,ωx,ωy,ωz是积分常数,代表刚体位移,k也是积分常数,若不计积分常数,则如果用柱坐标表示,则u0,v0,ωx,ωy,ωzare arbitrary constants representing therigid - body movements of the bar.

Assuming that the upper - end of the bar is constrained to prevent these rigid - bodymovements, we have the simple expressions.In polar coordinates,the displacement components will beThus it is seen that every cross - section of the barrotates an angleα=kz about the z axis and representsthe twist per unit length,that is, the relative angulardisplacement of two cross - sections at unit distance apart.

第20页:由此可得结论

由此可得结论,每个横截面在xy面上的投影不改变形状,只是转过一个角度α=kz,且单位长度的扭转角:将u=-,v=代入下式:

第21页:可以求得位移分量w且由以上两式

由此,可以求得位移分量w且由以上两式,最终可导出:这说明方程中的积分常数2 Gkthe displacement component w can be found Besides, by eliminating w ,we obtain

第22页:可以求得位移分量w且由以上两式(续)

谢谢!

顶部目录