页数:25页文件大小:467.5 KB来源: 弹性力学ppt课件
本课件围绕逆解法与半逆解法展开,说明逆解法与半逆解法的操作步骤,逐一考察一次式、二次式、三次式多项式应力函数分别能解决的矩形板受力问题。页面按板书顺序逐页呈现推导过程与结论,方便对照教材复习、自查解题步骤与公式来源。
第三章平面问题的直角坐标解答3—1逆解法与半逆解法3—2矩形梁的纯弯曲3—3位移分量的求出3—4简支梁受均布荷载3—5楔形体受重力和液体压力Solution of Plane Problems in Rectangular Coordinates Inverse Method and Method Pure Bending of a Rectangular Beam Determination of Displacments Bending of a Simple Beam Under Uniform Loads Triangular Gravity Wall
3—1逆解法与半逆解法多项式解答按应力求解平面问题时,如果体力是常量,则归结为由求解应力函数,再求应力分量。关键是求应力函数φ(x,y)解的方法:逆解法、半逆解法一、逆解法与半逆解法Inverse Method and Method Solution by Polynomials Inverse Method and Method
解的问题,根据弹性体的边界条件,先设定一部分或全部应力分量函数,从而导出应力函数,再考察这个应力函数是否满足相容方程,应力分量是否满足边界条件,若满足,这个结果就是正确的,若不满足,还须另作假设,重新考察
二、多项式解答(逆解法)1、一次式取φ(x,y)=a+bx+cy无论a、b、c取何值,均能满足相容方程应力分量:In this section, we shall use the inverse method to obtain the solution ofsome simple plane problems by stress functions in the form ofpolynomials, assuming that there are no body forces acting, i.e.,X=Y=0 When the stress function is taken as a polynomial in linear form,φ(x,y)=a+bx+cy,the compatibility equation is satisfied for all values of the constants a, ban
根据边界条件考察应力分量所对应的面力结论(1)线性应力函数对应无体力、无面力、无应力的情况(2)在平面问题的应力函数上加上一个线性函数,并不影响应力面力为零无论任何边界The stress boundary conditions always giveregardless of theshape of the bodyand thecoordinate axeschosen.Thus, we conclude that A linear stress function corresponds to the case of no surfaceforces and no stress The superposition of a linear function to the stress functionfor any problem does not affect the stresses.
When the stress function is taken as apolynomial of the second degree ,φ(x,y)=ax2+bxy+cy2 The compatibility equation is also satisfiedfor all values of the constants a, b and c.The stress components are:In the case ofφ=ax22、二次式(polynomial of the second degree)
根据边界条件考察应力分量所对应的面力xy板左右两侧无面力上下两侧面力为2 aWhen such stresses exist in a rectangular plate with its edgesparallel to the coordinate axes左右两侧:Left and right:上下两侧:Upside and underside
考察:φ=(In the case ofφ=)结论根据边界条件考察应力分量所对应的面力φ=ax2能解决矩形板在y方向受均布拉力(a>0)或者受均布压力的问题(a<0)The stress functionφ=ax2 can solve the problem ofuniform tension(a>0) or uniform compression (a<0)of a rectangular plate inydirection.应力分量:the stresscomponentsare When such stress exist in a rectangular plate, there will be uniformlydistributed shearing forces on all the four edges.
xy左右两侧:板右侧受剪力-b作用;板左侧受剪力+b作用上下两侧:板下侧受剪力-b作用;板上侧受剪力+b作用Left and right:Upside and underside:
结论考察最后一项:φ=cy2φ=bxy能解决矩形板受均布剪力的问题Hence, the stress functionφ=bxycan solve theproblem of a rectangular plate in pure shear.It is easy to see the stress functionφ=cy2 cansolvethe problem of uniform tension (c>0) and uniformcompression (c<0) of a rectangular plate inxdirection.应力分量:The stresscomponents are
根据边界条件考察应力分量所对应的面力xy左右两侧:上下两侧:板左右两侧面力为2 c上下两侧无面力Left and right:Upside and underside:
φ(x,y)=ax2++cy2能解决什么问题?xy能解决矩形板既受拉又受剪的情况Thus, the problem which the stress functionφ(x,y)=ax2++cy2 can solve is
取φ(x,y)=ay3无论a取何值,均能满足相容方程3、三次式When the stress function is taken asφ(x,y)=ay3,(1)the compatibility equation is also satisfied for all valuesof the constanta.应力分量:The stresscomponents are(2)
xy根据边界条件考察应力分量所对应的面力左右两侧:板左右两侧受线性分布的沿y方向的面力For a rectangular plate, with coordinate axesshown in Fig.,Left and right side
上下两侧:上下两侧无面力矩形板左右两边的力合成为一个力偶,所以,φ=ay3能解决矩形板的纯弯曲问题。xyUpside and underside Hence, the stress functionφ(x,y)=ay3 can solve theproblem of pure bending of a rectangular beam.The constantacan be determined by the bending moment.
xyh/2 h/2 MMh1 For convenience, we consider only a unitwidth of the beam.
Let the bending momenton the unit width beM, which has adimension of [force][length]/[length], orsimply [force].
Substitution of the expression forσxin Eqs.(2) into Eqs.(3) yields On either of the vertical edges, the surfaceforces must have a resultant force equal tozero and a resultant moment equal toM.
This requires(3)The first equation is always satisfied whilethe second equation requires6 a=12 M/h3.
Since:The moment ofinertia of thebeam section Thus, Eqs.(2) become:(4)Eqs.(4) may be rewritten as(5)
Eqs(5) coincide completely with theelementary solution given in mechanics ofmaterials.Note:the solution (5) is exact only when thesurface forces on the ends of the beam consistof normal tractions proportional toy.If the couples on the ends are applied in anyother manner, this solution is no longer exact,because it will not precisely satisfy theboundary conditions on the ends.According to Saint - Venant's principle, h
当φ取为坐标x、y的三次或三次以上的多项式时,应力分量将不是常量,而是坐标的函数,此时,对于同一弹性体,在不同的坐标下,对应的应力分量不同,所解决的问题也不同.xy若采用如下的坐标系,φ=ay3能解决什么问题?
φ可以作为应力函数(2)求应力分量
(3)求对应矩形板的面力xy右左两侧:下上两侧:
思考:φ=2;φ=bx2 y在不同的坐标系下能解决什么问题?作业:P52 3.7.1 P523.7.2
谢谢!
下载地址:{{downurl}}
{{{a}}}
{{#b}}{{{b}}}
{{/b}} {{/title}} {{#nolog}}登陆注册
{{/nolog}} {{#djsx}}点我刷新
{{/djsx}} {{#gocz}} {{/gocz}} {{#ffqr}} {{/ffqr}}