页数:30页文件大小:404.0 KB来源: 弹性力学ppt课件
本课件围绕按位移求解空间问题展开,以位移分量为基本未知量求解空间问题,给出半空间体受重力、受均布压力与受法向集中力时的解答。页面按板书顺序逐页呈现推导过程与结论,方便对照教材复习、自查解题步骤与公式来源。
9 Solution of Spatial Problems9.1 Solution in terms of displacements9.2 Infinite elastic layer under gravityand uniform pressure9.6 Concentrated normal lode on boundaryof a semi - infinite body9.10 Solution in terms of stresses
按位移求解空间问题(P184)取位移作为基本未知量,从空间问题的15个基本方程中消去应力分量和应变分量,得到只含位移分量的方程,解方程求位移,再由几何方程及物理方程求应变和应力9.1 Solution in terms of displacements Takethe displacement componentsu, v, w as thebasic unknown functions, formulatea system ofdifferential equationsandboundary conditionscontaining the displacement components only, solvefor these unknown functions and therebyfind thestrain components by the geometrical equationsandthenthe stress components by the physical equations.推导如下:For this purpose,
几何方程:geometrical equations将其代入物理方程得:Substitute the geometrical equations into the physical equations,
其中:将上述应力分量表达式代入平衡微分方程,并整理后得:
其中:这就是用位移表示的平衡微分方程,即拉密方程These are the differential equations we need insolving a spatial problem in terms of displacements.
解方程求位移分量,所求的位移分量须满足位移边界条件:按位移求解也能分析应力边界问题应力边界条件:其中的应力分量用上述物理方程表示,就得到用位移分量表示的应力边界条件。
轴对称问题几何方程:将其代入物理方程得:其中:Substitute the geometrical equations into the physical equations,
将上述应力分量表达式代入平衡微分方程,并整理后得:这就是按位移求解空间轴对称问题时的基本微分方程These are the differential equations we need in solving aspatial spherical symmetry problem in terms of displacements.where:
半空间体受重力及均布压力例1.如图所示,半空间体,密度为ρ,边界上受均布荷载q作用,以边界面为xy面,z轴向下ρgq9.2 Infinite elastic layer under gravityand uniform pressure Let us consider an elasticlayer of infinite extent anduniform thickness,which isfixed at its lower surfaceand subjected to a uniformpressure of intensity q onits upper surface. With xyplane in the upper surfaceand z axis downward.
Use the method分析如下:So,将上式代入方程:半空间体的体积力:X=0 Y=0 Z=ρgThe body force components are X=0, Y=0,and Z=ρg由于对称,所以位移分量u=0,v=0,w=w(z)Because of symmetry,the displacement at any point in thelayer is vertical and depends on z only
前两式自然满足,第三式为:The first two Eqs.are identically satisfied and the third one becomes
简化后得:Integration with respect to z yields积分后得:Which can be readily simplified toA、B是积分常数Where A and B are arbitrary constants
由物理方程求应力,the stress componentscan be obtained as:Now we try to determine the constants by boundary conditions.由应力边界条件求积分常数AUse the stress components boundary condition
应力边界条件最后求得应力分量为:Thus the stress components are entirely determined as
由位移边界条件求积分常数BUse the displacement boundary condition
将w的表达式代入,求得:位移边界条件:(离开边界较远处,位移为零)
最后,the vertical displacement位移分量为:最大位移发生在边界上:Evidently the maximum displacement occurs at the upper surface
求出的应力分量和位移分量满足所有的条件,所以初始的位移假设是正确的,所得的应力和位移是正确的解答。Now the stresses and displacements are entirelydetermined and all the conditions are satisfied.This proves the validity of the assumption andthereby the correctness of the solution obtained.侧压力系数:(铅直面上的水平正应力与水平面上的铅直正应力之比)and are the horizontal stresses on vertical planes and is thevertical normal stress on horizontal planes. The ratio is calledthe coefficient of lateral pressure in soil mechanics andfoundation engineering.
半空间体在边界上受法向集中力例2.如图所示,半空间体受法向集中力P作用9.6 Concentrated normal lode on boundaryof a body Let us consider a under the action of aconcentrated normal lode P on theboundary plane.这是一个空间轴对称问题,对称轴就是力P的作用线,建立如图所示坐标系,z轴放在力P的作用线上Evidently, this is an axisymmetricproblem with the line of action ofP as the axis of symmetry.
若不计体力,位移分量应当满足轴对称问题的基本微分方程:其中:
应力边界条件平衡条件:满足上述一切条件的解答(布希涅斯克J.解答)如下:zrPrzROn the part of the boundary plane, we have theboundary conditions
其中:同学可自行验证:位移分量满足平衡微分方程,几何方程和物理方程,应力分量满足边界条件,因而解答是正确的求水平边界上一点的沉陷:From the expression for w, we can evaluate the verticaldisplacements at any point in the horizontal boundary plane
本节中解出的问题,其应力分布具有如下特征(1)当R→∝时,各应力分量趋于零,当R→0时,各应力分量趋于无限大,即离开集中力作用点非常远处,应力非常小,靠近集中力作用点处,应力非常大(2)水平截面上的应力(σr,τzr)与弹性常数无关,因而,在任何材料的弹性体中都是同样分布的,而其他截面上的应力,一般都随μ而变化(3)水平面上的全应力,都指向集中力的作用点,因为σz:τzr=z:r
利用上述解答,用叠加法求法向分布力引起的位移和应力:ξxξK如图,设有单位力均匀分布在半空间体边界的矩形截面上矩形截面的边长为b和c,求对称轴上距形心I为x的K点的沉陷
ξxξK取微单元ξ,微单元上的力可看作集中力:由dP引起的K点的沉陷:
由单位力引起的沉陷为:这里:
上述积分结果可以写成:其中:
当K点在矩形的中心I,则沉陷:而
谢谢!
下载地址:{{downurl}}
{{{a}}}
{{#b}}{{{b}}}
{{/b}} {{/title}} {{#nolog}}登陆注册
{{/nolog}} {{#djsx}}点我刷新
{{/djsx}} {{#gocz}} {{/gocz}} {{#ffqr}} {{/ffqr}}