页数:22页文件大小:241.5 KB来源: 弹性力学ppt课件
本课件围绕矩形梁的纯弯曲展开,以三次式应力函数求解矩形梁纯弯曲,给出应力分量、应变分量与位移分量,并据此校验材料力学的平面假定。页面按板书顺序逐页呈现推导过程与结论,方便对照教材复习、自查解题步骤与公式来源。
第三章平面问题的直角坐标解答3—1逆解法与半逆解法3—2矩形梁的纯弯曲3—3位移分量的求出3—4简支梁受均布荷载3—5楔形体受重力和液体压力Solution of Plane Problems in Rectangular Coordinates Inverse Method and Method Pure Bending of a Rectangular Beam Determination of Displacments Bending of a Simple Beam Under Uniform Loads Triangular Gravity Wall
3—2矩形梁的纯弯曲/2 h/21例1.图示矩形截面梁,设板厚<<板长和板宽(平面应力情况),若板厚>>板长和宽(平面应变情况),取厚度为1,在两端受图示力偶M作用(单位宽度的力偶),体力不记,求梁内各点的应力分量,变形及位移分量.Pure Bending of a Rectangular Beam For convenience, we consider only a unit width of the beam. Letthe bending moment on the unit width beM, which has adimension of [force][length]/[length], or simply [force].
sof the constanta.应力分量:The stresscomponents are
b、利用边界条件求系数/2 h/2 MM上、下面左、右面自然满足自然满足
M与应力形成一致时取+;反之,取-(1)(2)式(1)自然满足由式(2)
应力分量:注意:梁截面惯性矩moment of inertia
\应力分量:上述结果与材料力学中的完全相同:梁的各纤维只受按直线分布的弯应力Eqs coincide completely with the elementary solutiongiven in mechanics of materials.注意:组成力偶的面力按直线规律分布时,上述结果完全精确,如果两端的面力按其他方式分布,上述结果有误差。
The solution is exact only when the surface forces on the ends of thebeam consist of normal tractions proportional toy.If the couples on the ends are applied in any other manner, this solutionis no longer exact, because it will not precisely satisfy the boundaryconditions on the ends.按照圣维南原理,只在梁端附近有显著误差,在离开梁端较远处,误差可以不计
2、求应变分量(平面应力问题)strain componentsplane stress When the stress components have been found by solution interms of stresses, we can find the displacement componentsby physical and geometric equations.This will be illustrated with the problem of pure bending asan example.
移项得:左边是y的函数,右边是x的函数,两边要相等,只可能等于常数ωIt can be rewritten as:We note that the left side is a function ofyalone while theright side is a function ofxalone.A function ofycan be equal to a function ofxonly whenthey are both equal to a constant, sayω.
上述两式积分后得:(1)(2)By integration, we have:
上述两式代入u、v的表达式得:Thus, the displacement components can be expressed as:(1)(2)
From (1), we can see that, no matter how thebeam is supported, the angle of rotation of anyvertical line element in the beam isOn a given cross section of the beam,βisconstant, sincexis constant.
This showsthat all the vertical line elements in the crosssection have the same angle of rotation dueto bending of the beam, and consequentlyproves that the cross section remains planeafter bending.
From (2), we see that all the longitudinal lines(fibres ) of the beam will have the samecurvatureafter bending.This is the basic formula for computation ofbeam deflections in mechanics of materials.
根据边界条件求积分常数将上述纯弯曲梁加上约束:/2 h/2 MM(1)使之成为简支梁If the beam issimply supported:边界条件:The conditions ofconstraint are There will be neither horizontal nor vertical displacements atthe hinged support, and there will be no vertical displacementeither, at the bar support.
代入位移表达式得:最后得简支梁的位移分量:From which we have Insertion of these values into (1) and (2) yields
梁轴线的挠曲线方程:xyh/2 h/2 MMThe deflection of the beam axis is:Which is the same asthe result obtained inmechanics of materials.(2)若梁是悬臂梁In the case of a cantilever beam边界条件:The conditions of constraint:
由此求得:悬臂梁的位移分量:From which we have
梁轴线的挠曲线方程:上述结论与材料力学中的相同验正材料力学中的平面假定是否成立?(1)(2)The deflection of the beam axis is:Which is also the same as the result obtained in mechanics ofmaterials.
由(1)由(2)无论约束情况如何,铅垂直线的转角都是β,同一截面,x为常数,所以β为常数,即同一平面转角相同,横截面保持为平面
无论约束情况如何,梁的纵向曲率为与材料力学求梁的挠度时所用的基本公式一致对平面应变问题,只需将上述方程中的;将即可In the case of plane strain, we should In all the equations involving strain anddisplacement components.
谢谢!
下载地址:{{downurl}}
{{{a}}}
{{#b}}{{{b}}}
{{/b}} {{/title}} {{#nolog}}登陆注册
{{/nolog}} {{#djsx}}点我刷新
{{/djsx}} {{#gocz}} {{/gocz}} {{#ffqr}} {{/ffqr}}