页数:23页文件大小:452.5 KB来源: 包装技术基础ppt课件
本课件讲解机械冲击理论,从冲击脉冲、速度变化与恢复系数出发,推导产品在缓冲衬垫上的位移响应、冲击历时与自由振动周期,并给出冲击放大系数、临界状态与缓冲厚度计算的方法。
第13课机械冲击理论:本页为该章节的标题页,标示本节主题与后续内容的展开方向。
本页以图示为主,源文件仅提取到图题或标题文字「第13课机械冲击理论」,建议对照原课件图片补充本页要点说明。
Representation of mechanical:Representation of mechanical shock
图13 冲击示意:A falling package
本页以图示为主,源文件仅提取到图题或标题文字「A falling package」,建议对照原课件图片补充本页要点说明。
coefficient of restitution,e:ebound velocity asa function of the
The relationship among shock:The relationship among shock parameters
Package damage is related:s involved inmechanical
本页以图示为主,源文件仅提取到图题或标题文字「Package damage is related」,建议对照原课件图片补充本页要点说明。
图13 冲击示意:A simple product-package systemFigure 13. 5 A spring-mass model forthe product-package system
The impact of a product-package:The impact of a product-package system
临界点分析:A, the product is ready to fall. The potential energyat this moment is:13. 5whereAt PointC, the kinetic energy of the system is given by13.
613. 7which show that the kinetic energy at this moment is equalto the initial potential energy of the system. In the moments following the initial contact of the containerwith the impact surface, the amount of energy absorbed bythe linear cushion is:13. 8
whereX2is the downward:oduct on thecushion
本页以图示为主,源文件仅提取到图题或标题文字「whereX2is the downward」,建议对照原课件图片补充本页要点说明。
The static deflection:inear cushion is:so Equation 13
本页以图示为主,源文件仅提取到图题或标题文字「The static deflection」,建议对照原课件图片补充本页要点说明。
15whereGm is unitless:derstood to be in units of 1g. 13. 16Gm is proportional to the square root of the drop height:This means that if we double the drop height, the magnitudeof the shock is not doubled, but rather increased by a factorof (about 1.
4). Equation 13. 15 may be rearranged to produce an expressionfor :13. 17
式13 推导:may also be rearranged to produce anequivalent expression:13. 1813. 19giving us an expression for the maximum dynamiccompression as a function of the maximum accelerationand the drop height.
Conclusions:1.is related to the drop height, the springiness of thecushion and the weight of the product. 2. The stiffer the spring or cushion, the larger the value for.
3. The higher the drop height, the larger the value for(). 4. The heavier the product, the smaller the value of as longas the spring or cushion is working.
冲击历时:We may approximate the displacement of the product onthe cushion,, at any time during the impact with the function:13. 20where13.
21f2-the natural frequency of the product (M2) on the cushion(k2).
Shock durationand maximum:Shock durationand maximum displacementFigure 13. 8 Shock durationand the natural period ofvibration
T2-The period of the free:oduct on thecushion
本页以图示为主,源文件仅提取到图题或标题文字「T2-The period of the free」,建议对照原课件图片补充本页要点说明。
冲击放大与临界状态:ElementDefine:Ge-the maximum acceleration experienced by the criticalelement, resulting from a shock(Gm and), as shown inFigure 13.
9. Am-an amplification factor, analogous to vibrationmagnification relating the input and output shock levels:13. 26Ge =AmGm 13. 27
Shock transmission:Shock transmission
本页以图示为主,源文件仅提取到图题或标题文字「Shock transmission」,建议对照原课件图片补充本页要点说明。
During the impact:s given by theexpression
本页以图示为主,源文件仅提取到图题或标题文字「During the impact」,建议对照原课件图片补充本页要点说明。
The largest value ofAm:depends on therelationship of and :1. If(Equation 13. 29)2. If(Equation 13. 28)3. Notice that as the ratio becomes large, the value forAmapproaches 1, reflecting the "direct" transfer of the shock to astiff element. 4. For small values of the frequency ratio:
下载地址:{{downurl}}
{{{a}}}
{{#b}}{{{b}}}
{{/b}} {{/title}} {{#nolog}}登陆注册
{{/nolog}} {{#djsx}}点我刷新
{{/djsx}} {{#gocz}} {{/gocz}} {{#ffqr}} {{/ffqr}}