首页基础学科包装技术包装技术基础 04 Lesson 4 Corrugated Fiberboard Boxes第4课 瓦楞纸板箱.ppt

04 Lesson 4 Corrugated Fiberboard Boxes第4课 瓦楞纸板箱.ppt

页数:39页文件大小:1.71 MB来源: 包装技术基础ppt课件

本课件围绕瓦楞纸板箱展开,依次介绍瓦楞纸板的发展沿革、楞型结构与组合纸板、箱板纸与芯纸,以及性能指标与测试方法,并延伸到箱型、运输规则与堆码受压性能,是运输包装件设计的常用容器模块。

第4课瓦楞纸板箱要点页,列出Historical…、Corrugated Board、Properties and…等主要内容
历史沿革要点页,列出First patents…、Unlined…、The first user…等主要内容
结构与构成内容讲解页,围绕Construction : linerboard and medium展开,属瓦楞纸板的结构与楞型章节内容
查看本课件的文字版(共 39 页,供检索与复制)

第1页:第4课瓦楞纸板箱

  • Historical perspective
  • Corrugated Board
  • Properties and Tests
  • Corrugated Boxes
  • Carrier Rules
  • Stacking and Compression

第2页:历史沿革

  • First patents for making were recorded in England in 1856.
  • First patents in US were granted to A.L.Jones in 1871
  • Unlined corrugated sheet---packing lamp chimneys and fragile objects.
  • The first user double-lined corrugated boxes was a cereal manufacturer(obtained acceptance in 1903)
  • Figures reversed from 20% to 80% between the world War I andII2.The specialized produce
  • Sheet plants buy combined board only printing and cutting.
  • About 770 plants produce more than 17.3 billion worth in America3.Rules for constructing corrugated containers
  • To enhance the quality
  • Rule of UFC and NMFC

第3页:结构与构成

结构与构成:Construction : linerboard and mediumMaterial:heavy paper---containerboardFacings---kraft linerboardMedium---one-ply sheet, hardwood or recycled fiberLinerboard(flat facing)Medium(fluted wavy)

第4页:Four types combined

Four types combined:Four types combined boardb. Single Wall(Double Face)one mediumtwo liner boardsa. Single Faceone mediumone liner board(for protective wrapping)

第5页:Double Walltwo mediumsthree

本页源文件仅提取到动画占位标记,建议对照原课件动画补充本页要点说明。

本页以图示为主,源文件仅提取到图题或标题文字「Double Walltwo mediumsthree」,建议对照原课件图片补充本页要点说明。

第6页:瓦楞纸板

瓦楞纸板:FlutesProfile: arches with proper curve----the strongest way to span spaceFlutesas arches---resist bending and pressure, support weight, as cushion.

Proper curve: between U and V (Also has its advantages)Flutes also as a insulator to protect sudden temperature changesVertical linerboard provides strength; protects from damage.

Several standard shapes(A,B,C,E,F…) ,Contrast:A-flute----the largest profileB-flute----smaller than AC-flute----between A and BE-flute----smaller than BF-flute----micro-fluteNew flute---Macro-flute

第7页:标准瓦楞楞型参数

表4.1 标准瓦楞楞型的参数(楞型、伸展系数、楞高与楞数)
楞型伸展系数(Take-up factor)楞高每英尺楞数每米楞数
A 楞1.544.67 mm30~36100~120
B 楞1.322.46 mm44~50145~165
C 楞1.423.63 mm36~42120~140
E 楞1.271.19 mm86~94280~310

源文件该表无换行,楞型字母与数值被提取为连排文本,本表按楞型参数的标准对应关系归位;伸展系数不含面纸。

第8页:箱板纸

  • Linerboard---natural kraft ;Solid bleached white kraft ; Mottled white ; OyserboardLinerboard with a whiter surface provide better graphics.
  • Recycled or secondary fiber---producing both two componentsRecycled board---smoother surface finish ;low CoF; excellent printing surface.

第9页:瓦楞纸板

瓦楞纸板:The most commonly used linerboard grades, based on Mullen burst test grading. European GradesNorth American GradesGrammageBasis WeightGrammage125g26b127g150g33b161g--38b186g200g42b205g225g----250g----300g69b337g400g--Other grades440g----1 kg = 2.

2046 b1 meter = 3. 28084 foot1 g/m2= 0. 205 b/MSFA generation of newer linerboards has high-performance boards, meeting ECT ratherthan Mullen burst test and basis weight requirements.lighter grades of the high-performance boards to get satisfactory performance

第10页:瓦楞纸板

瓦楞纸板:Corrugating AdhesiveThe corrugating machine forms the medium into a fluted pattern and bonds itto the linerboard facings , usually with a starch-based adhesive1) A starch-based adhesive applied at about 10 to 14 grams per square meter.

2) Requirements : not tolerant high moisture and loses strength quickly. 3) When higher resistance is needed, starches can be modified orsupplemented by the addition of various polymeric materials.

4) Weather-resistant adhesive would maintain box properties at a somewhathigher level for a longer period. 5) Water-resistant adhesive would be required for those applications wherethe finished container will be in actual contact with water for periods of time,and the coating or waxed should be treated

第11页:瓦楞纸板

瓦楞纸板:Broad ManufactureCorrugating machine is made up of a set of stations that take the appropriatelinerboards and mediums, shape the flutes, join fluted medium to linerboards.

Preconditionmediumwith heatand steamPretreatedlinerboards to thesame temperatureand moistureBrass fingersFlute tipsadhesiveThe single-facer of a corrugating machine is where the flutes are formedand bonded to the inside liner

第12页:瓦楞纸板

瓦楞纸板:Bridge---Draped in an overlapping wave pattern to the double-backer stationPurpose---Isolating the two ends of the corrugating machine; balance; slow downThe double-backer section of corrugating machine where a second linerboardis applied to the single-faced material coming from the single-facer unit

第13页:Manufacture

  • Manufacture:
  • Adhesive---On the other side of the medium to glue outer linerboard.
  • Final heating and cooling section---Between two long , flat belts.
  • Trimming edges---Slit board to required width and length and stack
  • Balanced construction---Outer and inner have identical grammage.
  • Upgrading only one liner may gain performance.
  • Unbalanced constructions---more problems with board wrappage.
  • Heavier liner is placed on the outside for better printing and on theinside for better compression strength.

第14页:性能与测试

性能与测试:Most board tests are described in methods provided by TAPPI. Standard corrugated board burst and crush tests. 1. Mullen burst test(TAPPI T 810)Forcing a rubber diaphragm against the facing until it bursts

第15页:性能与测试

性能与测试:ECT(TAPPIT811)Asmallspecimenisplacedbetweentheplatensofacompressiontesterandloadeduntilfailureoccurs. Valuesareafunctionofthestiffnesscontributedbythefacingsandthemedium.

ECTvalueshaveadirectrelationshiptotheprojectedstackingstrength. 3. Flat Crush Test(TAPPI T 808)Similar to the edge compression test except the specimen iscompressed in the flat.

The test provides a measure of flute rigidity. 4. Combined Weight of FacingsDescribes the combined linerboard weight per 1,000 square feet ofcorrugated board5.

第16页:性能与测试

性能与测试:Gurley Porosity(TAPPI T 460 and T 536)Measures the time it takes for a given volume of air to pass through apaper. The lower the number, the more porous the paper.

The porosity ofpaper is sometimes the culprit when problems occur at vacuum-cuptransfer points. 7. Flexural Stiffness(TAPPI T 820)Rrelated to box compression strength.

Reduced stiffness is a goodindicator of damage during fabrication. 8. Water Take-up Tests(TAPPI T 441)The Cobb size test, measures the amount of water absorbed by the facingin a given time, used to measure water absorption for materials specifiedto be used for hazardous product containers

第17页:戳穿强度试验

戳穿强度试验:Puncture Test(TAPPI T 803)Measures the energy required to puncture a board with a triangularpyramidal point affixed to a pendulum arm.

Test the resistance and stiffness of triple wall corrugatedThe box maker’s stamp on triple wall containers calls for a puncture test10.

Pin Adhesion(TAPPI T 821)Pin adhesion quantifies the strength of the bond between themedium's flute tips and the linerboard facings.

第18页:瓦楞纸箱

瓦楞纸箱:Selecting the Correct FluteuseacarrierclassificationandC-fluteasgoodstartingpoints. E-FluteC-FluteB-FluteA-Flute*Characteristicpoorgoodfairbest*Stack strengthbestfairgoodpoorPrintingbestfairgoodpoorDie cuttingpoorbestfairgoodPunctureleastfairgoodmostStorage spacebestfairgoodpoorScore/bendpoorgoodfairbestCushioningfairfairgoodpoorFlat crushComparison of corrugated board characteristics

第19页:瓦楞纸箱

瓦楞纸箱:E-andF-flutesarenotusedinshippingcontainersbutratherarereplacementsforthickergradesofsolidpaperboard. Canbeconsideredifafoldingcartondesigncallsforboardsthickerthan750(30point).

Alsobeusedtoreplacepaperboardforheavierorspecialprotectiveprimarypacksasprimarycontainerwhileindistribution. Suchassmalltools,hardware,smallappliances,andhousewares…A-fluteoriginally specified, not commonly use . almost 5 mm (1/4 in.)Occupies more space ,has significantly greater deflection before bearing a loadwhen compressed.

The thicker section give it the highest top-to-bottomcompression strength. A-flute has the lowest flat crush resistanceB-fluteis used where box stacking strength is not required.

第20页:瓦楞纸箱

瓦楞纸箱:B-FluteC-FluteA-FluteMedium Grammage1. 151. 000. 70127g1. 451. 250. 90161gN. A1. 501. 10195gRelative flute flat crush values

第21页:瓦楞纸箱

  • BoxStyle
  • Many standard box styles can be identified in three ways: by a descriptive name,by an acronym based on that name, or by an international code number. Forexample, a Regular Slotted Container could als…
  • There are many standard corrugated box styles: Slotted Boxes, Telescope Boxes,Folders, Rigid Boxes (Bliss Boxes), Self-Erecting Boxes and Interior Forms“Regular Slotted Container”(RSC or #0201) is th…

第22页:Parts of a regular

瓦楞纸箱:Figure 4. 10 Parts of a regular slotted container (RSC) blank

第23页:瓦楞纸箱

瓦楞纸箱:A flat piece of corrugated fiberboard, which has been cut, slotted andscored, is called box blank. For some box styles, in order to make a box,the two ends of the box blank must be fastened together with tape,staples or glue.

The place where these two ends meet is known as themanufacturer's joint. Liquid adhesives are most often used to join the two surfaces.

Often there isa glue tab, extending along one end of the box blank. The tab can bejoined to either the inside or the outside of the box.

第24页:瓦楞纸箱

瓦楞纸箱:Bliss style containerBliss-style box design variations

本页以图示为主,源文件仅提取到图题或标题文字「瓦楞纸箱」,建议对照原课件图片补充本页要点说明。

第25页:尺寸确定

尺寸确定:Dimensions are given in the sequence of length, width and depth. Dimensions can be specified for either the inside or the outside of thebox.

Accurate inside dimensions must be determined to ensure the properfit for the product being shipped or stored. At the same time, palletizingand distributing the boxes depends on the outside dimensions.

The boxmanufacturer should be informed as to which四. Corrugated BoxesTop LoadingEnd Loading

第26页:运输规则

  • The Uniform Freight Classification (UFC) and National MotorFreight Classification (NMFC) were established to categorize articlesfor shipment via common carrier with respect to value, density, fragili…
  • The classifications specify the conditions under which specificarticles can be shipped and at what rates. When shipping by rail, refer toUFC. When shipping by truck, refer to NMFC. UFC rule 41 and NM…
  • There are four basic steps for determining authorized packaging:
  • Fully identify the product.
  • Select the proper governing classification.
  • Use the "Index to Articles" to find the applicable item number.
  • Consult the proper article to find the required packaging.

第27页:运输规则

  • Failure to comply with regulations can subject the shipper to penaltiessuch as higher freight rates, refusal of acceptance by the carrier, ornonpayment of damage claims.2. Summary of Rules for Corrug…
  • Carrier rules for corrugated box construction can be summarized asfollows:
  • Specified boards (using either Mullen burst test or ECT values) shallbe used for a given product weight, providing the box does not exceed aspecified dimensional limit. The dimensional size limit for…
  • Table 4.6 summarizes the construction requirements for corrugatedboxes. The rules also require that a box manufacturer’s certificate (BMC)on the bottom of the container ( Figure 4.11).

第28页:Box manufacturer's

运输规则:Figure 4. 11 Box manufacturer's certificates using burst test and ECT values

第29页:PART B

PART B:PART B*PART A*Minimum EdgeCrush Test(ECT)(lbs. per in.width)MinimumCombined WeightofFacings,includingCenter Facing(s) ofDouble Wall andTriple Wall BoardorMinimumCombined Weightof Pliers, SolidFiberboard,ExcludingAdhesives(lbs.per1,000 sq.ft.)Minimum Burst Test,Single Wall, DoubleWall or SolidFiberboard(lbs.per sq.in.)orMinimum Puncture Test,Triple WallBoard(in.oz.per in.oftear)MaximumOutsideDimension,Length,Width andDepthAdded(in.)Maximumweight ofBox andContents(lbs.)Table 4. 6 Summary of carrier rules for corrugated boxes

本页含表格数据(瓦楞纸箱运输规则 PART A/PART B 边压强度与定量对照,源文件无换行,行列无法安全对应),源文件缺少行列分隔,表格结构待人工还原。

第30页:Single Wall Corrugated

Single Wall Corrugated:Single Wall Corrugated Fiberboard Boxes2326293240445552667584111138180125150175200250275350405060758595105203550658095120Double Wall Corrugated Fiberboard Boxes42485161718292110126180222270200275350400500600859510511011512080100120140160180

第31页:Triple Wall Corrugated

Triple Wall Corrugated:Triple Wall Corrugated Fiberboard Boxes67809011216822226436070090011001300110115120125240260280300Solid Fiberboard Boxes1141491902372831251752002753504060759010020406590120* Mullen(Part A) and ECT(Part B) are presented side-by-side,but there is no correlation between the values

第32页:堆码与受压

Stacking strength
the maximum compressive load (poundsor kilograms) that a container can bear over a given length of time, undergiven environmental/ distribution conditions without failing.
  • Stacking strength is defined as the maximum compressive load (poundsor kilograms) that a container can bear over a given length of time, undergiven environmental/ distribution conditions without fail…
  • The ability to carry a top load is affected by the structure of thecontainer and the environment it encounters, and the ability of the inner(primary) packages and the dividers, corner posts, etc. to …
  • The simplest and most common corrugated transport packages areregular slotted containers (RSCs, Box Style 0201) in which thecorrugation direction is typically vertical-parallel to top-bottom stacking…
  • Compression strength of regular slotted containers is a function of:
  • Perimeter of the box (two times length plus two times width)
  • Edge crush test of the combined board
  • Bending resistance of the combined board
  • Aspect ratio (L:W) and other factors

第33页:堆码与受压

  • When we know the above variables, we can estimate the compressionstrength through an equation known as the McKee formula.
  • BCT=2.028×(ECT)0.746×((Dx×Dy)0.254)1/2×BP0.492 (4.1)Where:BCT = RSC top-to-bottom box compression strength, kN/m2(lbf/in.2 orp.s.i)ECT = edge crush test, kN/m (lbf/in.)Dx,Dy = flexural stiffnesses of…

第34页:The McKee formula can only

  • The McKee formula can only be applied to RSCs, and only those with aperimeter-to-depth ratio no greater than 7:1.
  • McKee also created a simpler formula based on caliper of thecombined board instead of bending stiffness:BCT=5.87×ECT×(T×BP)1/2 (4.2)Where: T = caliper of combined board, m (in.)Solving for ECT, the s…

第35页:堆码与受压

  • The ability of a container to perform in distribution is significantlyimpacted by the conditions it encounters throughout the cycle.
  • If the original box compression strength is known, we can factor itby generally accepted multipliers to arrive at an estimated maximumsafe stacking strength (Table 4.7)2.Distribution Environment and …

第36页:多层堆叠

多层堆叠:Table 4. 7 Environmental Stacking FactorsWorst CaseBest CasePallet PatternsNegligible lossColumnar, aligned0. 850. 910-15 percent lossColumnar, misaligned0.

40. 640-60 percent lossInterlocked0. 60. 820-40 percent lossOverhang0. 750. 910-25 percent lossOverhang0. 60. 910-40 percent lossExcessive handling

本页含表格数据(多层堆叠(Multifliers)压缩损失与堆码时间数据,源文件缺失列分隔),源文件缺少行列分隔,表格结构待人工还原。

第37页:堆码与受压

堆码与受压:Compression RequirementIf the compression strength and distribution environment is known, theeffective stacking strength of any given RSC can be reasonably estimated.

If the distribution environment, container dimensions and flute profile areknown, a compression requirement can be estimated.

This can be of greatvalue, because once a compression requirement is determined, the ECTrequirement can be determined (and, therefore, board combination options aswell).[Example] A box of 0.

第38页:堆码与受压

堆码与受压:Determine maximum number of boxes above bottom box: 3 /0. 30-1= 82). Determine load on bottom box: 8×12 kg = 96 kg3). Determine Environmental Factor by multiplying together all factorsthat apply:180 days, 0.

5080% R. H. 0. 68Interlocked stack 0. 50Multiplier product(Environmental Stacking Factors) 0. 174). Determine required box compression strength:BCT = anticipated load/stacking factor=96 kg/0.

17=564 kgNow that the actual compression strength is know, this value can beplugged into the McKee formula (4. 3), and the required edge crush test(ECT) value of the corrugated board can be calculated.

第39页:Stronger liners and

  • Stronger liners and medium(s)
  • Load sharing
  • Increase the number of corners
  • Change corrugation direction
  • Dimensions: Depth, Length to width, Perimeter, Panel size
  • Multiwall corrugated fiberboard
  • Partitions, inserts and interior packaging
  • Lamination
  • Treatments, impregnations and coatings
顶部目录