页数:30页文件大小:298.5 KB来源: 包装技术基础ppt课件
本课件讲解运输包装,梳理其发展简史、功能与目标、成本构成、设计流程与十步法,并延伸到仓储与配送环境、单元载荷与集装模式,以及托盘集装尺寸优化的系统化方法与验证手段。
第16课运输包装:本页为该章节的标题页,标示本节主题与后续内容的展开方向。
本页以图示为主,源文件仅提取到图题或标题文字「第16课运输包装」,建议对照原课件图片补充本页要点说明。
美国运输包装简史:本页为该章节的标题页,标示本节主题与后续内容的展开方向。
本页以图示为主,源文件仅提取到图题或标题文字「美国运输包装简史」,建议对照原课件图片补充本页要点说明。
运输包装的功能与目标:The functions of distribution packaging can be summarized asfollows:ContainmentProtectionPerformanceCommunication-Most distribution packaging should address the following goals:Product protection:Ease of handling and storageShipping effectivenessManufacturing efficiency:Ease of identificationCustomer needsEnvironmental responsibility
包装成本:It was estimated that expenditures for all packaging materials,including expendable (one-way) shipping pallets, wereapproximately $100 billion in 1997.
Of this total, about one-third wasin the form of distribution packaging.-The largest single segment of distribution packaging is corrugatedshipping containers, at approximately 20% of total expenditures and60% of distribution packaging costs.-It has been estimated that although actual freight claims paid bycarriers for damaging goods is approximately $2 billion, the actualcost to them and to shippers is really more than $10 billion per year.-Our goal in package design is to minimize the cost of bothpackaginganddamage.
包装设计流程:To develop an optimum distribution package that is bothfunctional and cost-effective, you will need more than justassistance from your packaging suppliers.-Although your experience with a product line and a supplier'sexperience with packaging materials are both helpful in designingpackaging, both of you should consider many factors in addition tothe product and the packaging.-Your scope of consideration should include all aspects of thedistribution system, including customers, carriers, and distributors,as well as the manufacturing plant, packaging line, warehousing,and shipping.
To be successful in distribution package design, take atotal-system approach.
包装设计系统方法:本页为该章节的标题页,标示本节主题与后续内容的展开方向。
本页以图示为主,源文件仅提取到图题或标题文字「包装设计系统方法」,建议对照原课件图片补充本页要点说明。
包装设计系统方法:本页为该章节的标题页,标示本节主题与后续内容的展开方向。
本页以图示为主,源文件仅提取到图题或标题文字「The optimum」,建议对照原课件图片补充本页要点说明。
包装设计系统方法:本页为该章节的标题页,标示本节主题与后续内容的展开方向。
本页以图示为主,源文件仅提取到图题或标题文字「包装设计系统方法」,建议对照原课件图片补充本页要点说明。
包装设计系统方法:本页为该章节的标题页,标示本节主题与后续内容的展开方向。
本页以图示为主,源文件仅提取到图题或标题文字「Protective package」,建议对照原课件图片补充本页要点说明。
包装设计系统方法:本页为该章节的标题页,标示本节主题与后续内容的展开方向。
本页以图示为主,源文件仅提取到图题或标题文字「包装设计系统方法」,建议对照原课件图片补充本页要点说明。
包装设计系统方法:本页为该章节的标题页,标示本节主题与后续内容的展开方向。
本页以图示为主,源文件仅提取到图题或标题文字「包装设计系统方法」,建议对照原课件图片补充本页要点说明。
Design Design:本页为该章节的标题页,标示本节主题与后续内容的展开方向。
本页以图示为主,源文件仅提取到图题或标题文字「Design Design」,建议对照原课件图片补充本页要点说明。
Here is another:Here is another suggestion. For any package designproject, after completing the 10-step procedure above,check your work against the list of importantconsiderations as follows.
By doing so you willsignificantly reduce the potential for an unpleasantsurprise when shipments begin. Package Design Project ChecklistHave you:1.
Considered the solid waste aspects of the packageand unit load, and their alternatives, to minimize impacton the environment?
最终校核:Pondered the use of returnable/reusable containers and dunnage? 3. Contemplated all cost factors in the distribution cycle: handling,storage, transportation?
4. Compared the cost of this package with company/plant averagesfor similar products? 5. Considered all possible alternatives in materials and methods?
6. Used industry standards for materials and design criteria wherepossible? 7. Performance-tested the design against accepted industrystandards?
仓库:The distribution warehouse is a central collecting point for aparticular good or a particular merchandising chain. Finished goodsare forwarded to and held at the warehouse until selected andassembled into a customer order.
The warehouse environment is notwell understood by many shippers. A typical dry groceries warehouse may contain 20,000individual stock items.
A hardware chain warehouse holds upwardsof 40,000 stock items. Product arrives at the central warehouse inbulk or unitized, is broken down or reunitized according to thewarehouse's needs, and then is arranged for stock-picking.
仓库:A product must fit the warehouse's material handling system. Thisoften means palleting loose loads or repalleting loads fromnonstandard pallets.
Depending on the operation, anywhere from 33to 70% of product received at a warehouse must be handledmanually before an order is placed in stock.
Manual handling, inaddition to being costly, is also a primary source of damage fromdropping. In the picking aisles, stock must beclearly identifiablefrom everyside.
仓库:An assembled order may contain items as disparate as eightmirrors, six assorted clocks, a case of oil, four shock absorbers, astepladder, and a Mepps #4 fishing lure.
These and other items areassembled on a mixed pallet for transport to the retail outlet. Containers must be easily handled by the picker and should bereadily packed onto a mixed-order pallet.
Container orientation onmixed-load pallets will tend to be on a "best fit" basis, regardless of"This side up" and "Do not stack" labels.
单元载荷:PalletsIt is simpler to move one 1,000-kilogram load than it isto move a thousand 1-kilogram loads. Loads are mostcommonly unitized on pallets, a platform that can bepicked up by the tines of a forklift truck.
Another technique uses slipsheets, tough fiberboard or plastic sheets on which the load isstacked. The truck used with slip sheets has a clamp mechanismthat grasps a protruding edge of the sheet and pulls the sheet andload onto a platform attached to the truck.
A third method of handlinga large group of assembled objects is with a clamp truck, amechanism that picks up loads by exerting pressure from both sidesof the load.
单元载荷:Each method has its advantages and disadvantages. Slip sheetsare economical, take up little space, and are light. However, theequipment is not universally available, is more expensive, and isslower to operate.
Pallets are universally adaptable to a variety ofhandling situations and locations. However, pallets are costly, takeup space, and can be difficult to dispose of.
Clamp trucks use noadded materials, but the geometry and character of the load must besuch that it can be squeezed between the truck's clamps.
单元载荷:There are many possible pallet sizes and designs;however, for the sake of standardized distribution, certainsizes and designs predominate.
By convention, a pallet'ssize is stated length first, with length defined as the topdimension along the stringer or stringer board ( Figure16.
3). About a third of all pallets are nominally 40 by 48inches, the standard set by members of the GroceryManufacturers of America.
单元载荷:Figure 16. 3 A block pallet(left) and a stringer-type pallet(right)
单元载荷:In addition to providing a product platform, the pallet is a bufferagainst the handling environment. A forklift driver placing a palletinto position cannot see the exact placement location: he stops whenhe hits something.
Viewed in this context, practices such as deliberate palletperimeter overhang can only lead to problems, and warehouseoperators condemn this habit.
The Food Marketing Institute holdspallet issues responsible for about half of all observed damage andcites poor pallet footprint as the single largest cause of shippingdamage.
单元载荷:Unit Load EfficiencyWarehouse floor space is rented by area, and the more productthat can be put into that area, the better.
Trucks loaded with lightproduct should have the available volume completely filled to carrythe maximum amount of product per trip.
Area and cube utilizationshould be every packager's concern. Optimum area and cube utilization begins with the design of theprimary package.
单元载荷:A thorough system analysis (including losses) can leadto substantial savings. A major business equipmentmanufacturer found that it had poor shipping experiencebecause of the hundreds of different package sizes in theproduct line.
The company designed a modular system,and all products were designed to fit one of 17 standardbox sizes. Besides significant inventory reduction, thecompany gained substantial transport savings, sincelarger, more stable pallet loads could be built with themodular system.
More-secure pallet loads resulted infurther savings through reduced product damage.
单元载荷:Stabilizing Unit LoadsUnit loads often need to be stabilized in order to retain loadgeometry and order during shipping and handling.
Strapping is usedmostly for heavier goods. Care must be taken that strapping doesnot cut into the corrugated container, impairing strength qualities.
Cord is sometimes used as a more economical alternative, alsocausing cut-in problems. Corner guards should be used to preventcut-in where strapping or cord is the necessary choice.
单元载荷:Hand-wrapping a pallet with stretch material costs about $1. 40. Machine-wrapping provides better material control and typicallyreduces the cost to about $1.
00. Machines with prestretch featuresreduce this cost still further. More costly open netting is used whereair circulation is essential.
Load stability can be increased through the use of high-frictionprinting inks and coatings or by the application of adhesive-likecompounds.
单元载荷:Caps and trays made of fiberboard or corrugated board are used toprovide shape to unstable loads, to provide bottom protectionagainst rough pallet surfaces, and, when used on top of a load, toincrease the platform quality for the next pallet.
Tier sheets improveavailable compression strength and increase stability by distributingweight and encouraging layers to act as a unit.
下载地址:{{downurl}}
{{{a}}}
{{#b}}{{{b}}}
{{/b}} {{/title}} {{#nolog}}登陆注册
{{/nolog}} {{#djsx}}点我刷新
{{/djsx}} {{#gocz}} {{/gocz}} {{#ffqr}} {{/ffqr}}