首页基础学科包装技术包装技术基础 06 Lesson 6 Glass Containers第6课 玻璃容器.ppt

06 Lesson 6 Glass Containers第6课 玻璃容器.ppt

页数:21页文件大小:362.5 KB来源: 包装技术基础ppt课件

本课件讲解玻璃容器的类型与通用性能、瓶罐制造工艺与瓶型设计要素,梳理玻璃在化学惰性、阻隔性、透明性与可回收性上的优势与局限,并说明配料、熔制、成型与退火的关键流程及其对容器强度的影响。

第6课玻璃容器要点页,列出Glass Types and…、Bottle…、Bottle Design…等主要内容
玻璃类型与性能要点页,列出Definition and…、About the…、The ingredients…等主要内容
玻璃类型与性能要点页,列出inert to most…、perfect foods…、impermeability等主要内容
查看本课件的文字版(共 21 页,供检索与复制)

第1页:第6课玻璃容器

  • Glass Types and General Properties
  • Bottle Manufacture
  • Bottle Design Features

第2页:玻璃类型与性能

  • Definition and characters--an inorganic substance fused at hightemperatures and cooled quickly
  • About the principle component---silica (quartz),
  • The ingredients of the components and different formulations.
  • Other mineral compounds be used to achieve improved properties:decolorizers–to clear; colorants–change the appearance…
  • Other glass types used for special packaging purposes.lead compounds, boron compounds, borosilicate glasses…
  • The problems of different formulationsinclude soda-lime and regularcontainer glass are mixed when recycling.

第3页:玻璃类型与性能

  • inert to most chemicals
  • perfect foods container.
  • impermeability
  • clarity
  • perceived image
  • rigidity
  • stable at high temperaturesDisadvantages:breakability; high weight; high energy costs .

第4页:瓶罐制造

  • Process: "blow-and-blow”; "press-and-blow"
  • two molds: blank mold forms the neck and the initial shapeblow mold produce the final shape
  • A blank mold comes in a number of sections:finish sectioncavity section (made in two halves to allow parison removal)a guide or funnel for inserting the goba seal for the gob opening once the gob is …

第5页:瓶罐制造

  • Molten glass flows depending on thebottle size.
  • Mechanical shears snip off "gobs"of molten glass. Each makes onecontainer.
  • Falling gob is caught by spout anddirected to blank molds.
  • Mass-production is made up ofseveral individual sections,each is an independent unit holdinga set of bottle-making molds.
  • Large bottles consists of a blankmold and a blow mold.
  • Higher production using double ortriple gobs on one machine. two orthree blank molds and similar blowmolds.Gobs---to form blank mold

第6页:瓶罐制造

  • Blow-and-blow process---for narrow-necked bottles
  • The two processes differ according to the parison producing.
  • Blow-and-blow process: (Figure 6.2):1. Gob dropped into the blank mold through a funnel-shaped guide(985°C)2. parison bottomer replaced guide ;air blown into settle mold to force thefinish section. A…

第7页:Blow-and-blow bottle

Blow-and-blow bottle:Figure 6. 2 Blow-and-blow bottle manufacture

第8页:瓶罐制造

  • Gob delivery and settle-blow steps aresimilar to blow-and-blow forming.
  • Parison is pressed into shape with ametal plunger rather than blown intoshape(Figure 6.3).
  • The final blowing step is identical tothe blow-and-blow process.
  • Used for smaller necked containers.
  • Better control of glass distributionpress-and-blow process---for wide-mouthed jars

第9页:Blow-and-blow used for

  • Blow-and-blow used for narrow-necked bottles.Press-and-blow used to make wide-mouthed jars and for increasinglysmaller necked containers. Better control of glass distribution.
  • Typical production rates range from 60 to 300 bottles per minute,depending on the number of sections in a machine, the number of gobsbeing extruded, and the size of the container.
  • The blown bottle is removed from the blow mold with takeout tongs andplaced on a deadplate to air cool for a few moments before transfer to aconveyor that transports it to the annealing oven.

第10页:瓶罐制造

  • Purpose---to reduce internal stresses; in annealing oven
  • Reasons---Walls are comparatively thick and cooling will not be even.The inner and outer skins of a glass become rigidThe still-contracting inner portion build up internal stressesUneven cooling deve…
  • Bottle passes through an lehr after removal from the blow mold.
  • Steps : glassware is carried on a moving belttemperature is raised to about 565°Cgradually cooled to room temperature with all internal stressesreduced to safe levels.(about an hour)
  • Improperly annealed bottles are fragile and high breakage
  • Hot-filling also produce unacceptable breakage levels.

第11页:瓶罐制造

  • Purpose---to reduce the coefficient of friction
  • Reasons---The inner and outer surfaces have different characteristicsThe outer surface comes in contact with the mold and takesthe grain of the mold surfaceBoth surfaces are pristine: monolithic, ste…
  • Methods---hot-end coating ; cold-end coatingsThe hot-end coating applied at the entrance to the annealing lehrto strength the glass surfaceCold-end coatings depending on the filling process and end u…
  • The label adhesive as one cold-end coating.

第12页:Use mechanical and

  • Use mechanical and electronic means.1) Squeeze testers subject the container walls to a compressive force( between two rollers)2) Plug gauges check height, perpendicularity, inside and outside finish…
  • Faulty containers crushing into cullet.
  • Transported in reusable corrugated shippers;Shipped on pallets
  • Automatic equipment used to clear tiers off the pallet and feed into thefilling machine.

第13页:Glass bottle

Bottle Parts:Bottle Parts and Shapes(Figure 6. 5)Figure 6. 5 Glass bottle nomenclatureSmooth round shapes---easily formedSuitable on filling linesLabeled at relatively high speedsAccurately positioned in spot-labelerGreater strength-to-weight ratiosBetter material utilization

第14页:Flat bottlesFlat

Flat bottlesFlat shapes:Figure 6. 4 Flat bottlesFlat shapes (Figure 6. 4) inherent problems. “bird swing” and “spike” defects. Spikes---glass projections inside the bottleBird swing---glass thread joining the two wallsCareful design to avoid stress points.angular shapes---difficult to form

第15页:瓶型设计

  • Finishes are broadly classified according to diameter ,sealing method,and special features.Continuous-thread (CT), lug, crown, threaded-crown, and roll-on are common finish designs.
  • Closures are based on the cost, utility, and decorationthread profile has a curved or partially semicircular profile

第16页:瓶型设计

  • The impact on filling, air displacement, and dispensing.Fill level in long narrow necksHeadspace for thermal expansion and facilitate filling.
  • Manufacturing defect---choke neckRidge on the sealing surface---overpress
  • Upper shoulder---below the neck.
  • Shoulder and neck blending---important design and production. lowershoulder---the integration point between the upper shoulder and thebody.Contact area

第17页:The most generalized

  • The most generalized areas of the bottle.
  • Labeling styles and preventing scuffing must be considered. Bottlesdesigned with label panels to prevent scuffing.
  • The panel may have prominent base and shoulder ridges.
  • In angular bottles, rounded corners are preferable for wraparound orthree-side labeling.
  • Spot labeling is normally a one-or two-sided application.
  • Labeling of non-round shapes is slower than for round shapes.

第18页:瓶型设计

  • High-abuse area---start high from the base curving into the base to asuitable base diameter.
  • Body-to-base curve should combine 3 radii.The largest blends body to heel, the smallest blends heel to base.
  • Diameter as large as possible as a good design.
  • Center of the base ensure a flat, stable bottom .
  • Stippled or knurled on the circular bearing surface to protect thescratches not to weaken the body during handling and usage.
  • Ketchup bottles and other sauce bottles require:heel and base be heavier and contoured when expelling the contents.
  • Wide-mouthed jar bases have designed-in stacking features.
  • Container base fits into recessed cap.
  • Indented container base fits over cap.
  • Heel tap---excess glass distributed to the heel.

第19页:瓶型设计

  • bottle's stabilitythe center of gravity ; the base surface areaproblem in manufacturing---tall and narrow bottleshandling and labeling in packaging line---high centerShort round oval bodies---efficie…
  • As much as possible, bottles should be designed to be all-around troublefree to manufacture, fill, close, and ship. Some designs are inherentlyweaker or more prone to cause trouble in their filling a…

第20页:瓶型设计

  • Vials and ampoules---mainly for pharmaceuticals and seraPreformed tubing stockSealed glass containersConstriction---easy fracture stress concentrationcoated with a ceramic paintStandard sizes---1, 2,…
  • Serum vialsa rubber septum ; an aluminum neck ring.a needle cannula to withdraw serumcan be accessed several times.standard sizes---1, 2, 3, 5, 10, and 20 ml.
  • Tumblers---wide-mouthed containersCarboys---bulk containment for acids or chemicals.

第21页:The pressurefactors

  • The pressurefactors: gas dissolved in the product. Beverage producers express this asthe number of volumes of gas dissolved in a unit volume of the product.For example, if a 48 oz. volume of carbon d…
  • Carbonated beverage and beer bottlesinternal gas pressure : soft drink 0.34 millipascal (50 psi),beer 0.83 millipascal (120 psi).capped well
  • The loss of bottle strengthBottle designs---round in cross sectiongently curving radii to maximize strength.
顶部目录