页数:43页文件大小:11.42 MB来源: 包装技术基础ppt课件
本课件讲解软包装复合材料的构成与工艺,涵盖铝箔、真空镀铝、复合动因与性能描述、涂布与干法/无溶剂/挤出复合,以及热封参数与成型充填封口设备,是软包装工艺的核心内容。
第8课软包装复合材料:Lesson 8第8课软包装复合材料
本页以图示为主,源文件仅提取到图题或标题文字「第8课软包装复合材料」,建议对照原课件图片补充本页要点说明。
塑化挤出机:本页为该章节的标题页,标示本节主题与后续内容的展开方向。
本页以图示为主,源文件仅提取到图题或标题文字「塑化挤出机」,建议对照原课件图片补充本页要点说明。
流延膜与片材挤出:本页为该章节的标题页,标示本节主题与后续内容的展开方向。
本页以图示为主,源文件仅提取到图题或标题文字「流延膜与片材挤出」,建议对照原课件图片补充本页要点说明。
三层共挤:本页为该章节的标题页,标示本节主题与后续内容的展开方向。
本页以图示为主,源文件仅提取到图题或标题文字「三层共挤」,建议对照原课件图片补充本页要点说明。
流延膜生产线布置:本页为该章节的标题页,标示本节主题与后续内容的展开方向。
本页以图示为主,源文件仅提取到图题或标题文字「流延膜生产线布置」,建议对照原课件图片补充本页要点说明。
纵向拉伸取向:本页为该章节的标题页,标示本节主题与后续内容的展开方向。
本页以图示为主,源文件仅提取到图题或标题文字「纵向拉伸取向」,建议对照原课件图片补充本页要点说明。
横向拉伸取向:本页为该章节的标题页,标示本节主题与后续内容的展开方向。
本页以图示为主,源文件仅提取到图题或标题文字「横向拉伸取向」,建议对照原课件图片补充本页要点说明。
吹膜模头截面:本页为该章节的标题页,标示本节主题与后续内容的展开方向。
本页以图示为主,源文件仅提取到图题或标题文字「吹膜模头截面」,建议对照原课件图片补充本页要点说明。
带分切的吹膜线:本页为该章节的标题页,标示本节主题与后续内容的展开方向。
本页以图示为主,源文件仅提取到图题或标题文字「带分切的吹膜线」,建议对照原课件图片补充本页要点说明。
Household foil:Household foil is typically 17. 5mm (0. 0007 inches)Available in gauges as low as 7mm (0. 00028 inches)Pin holing is present below 12mm (0.
0005 inches)Foil is susceptible to flex crackingMost foils are supported with plastic and/or paperUnsupported foil used for some lid-stock & tabletpush-through packaging
铝箔的完全阻隔性:Best deadfold propertiesEasily punctured (tamper evidence)Reflective of radiant heatConductive (induction sealing)Decorative appeal: all reflective metallics are aluminumAluminum Foil Characteristics
Unsupported foil:Unsupported foil, non-sealablee.g. confection and cheese wrapsUnsupported foil, heat sealablee.g. lidding stock, pharmaceutical tabletbacking materialSupported foil, non heat sealablee.g. decorative wraps, label stockSupported foil, heat sealablee.g. high barrier pouches and sachetslidding stock, retort pouches
铝真空镀膜:本页为该章节的标题页,标示本节主题与后续内容的展开方向。
本页以图示为主,源文件仅提取到图题或标题文字「铝真空镀膜」,建议对照原课件图片补充本页要点说明。
镀铝的外观效果:Improves moisture, aroma, light and oxygen barrierOxygen barrier improved:up to fifty times for OPP, up to ten times for PETStatic dissipative applicationsOPP, PET, & PA (nylon) most common packaging filmsAluminum Metallized Film
为何要复合:There is no perfect, universal packaging materialLaminates assemble materials with individuallydesirable properties to create an optimum materialLaminate: A product made by bonding togethertwo or more materials
Mechanical propertiestensile:scoefficient of frictionuse tempera
复合材料性能:Sealabilitymost flexible packaging is heat sealedmost heat seals are polyethylene basedother polymers used more critical applicationsAesthetic appearanceclaritysurface glossreflective metallics
Note:Note:Packaging laminate plies are alwayslisted from the outside to the inside
凹版涂布:本页为该章节的标题页,标示本节主题与后续内容的展开方向。
本页以图示为主,源文件仅提取到图题或标题文字「凹版涂布」,建议对照原课件图片补充本页要点说明。
湿法复合机:本页为该章节的标题页,标示本节主题与后续内容的展开方向。
本页以图示为主,源文件仅提取到图题或标题文字「湿法复合机」,建议对照原课件图片补充本页要点说明。
Dry Bond Laminating:Dry Bond Laminating
本页以图示为主,源文件仅提取到图题或标题文字「Dry Bond Laminating」,建议对照原课件图片补充本页要点说明。
无溶剂复合:Solventless laminating uses catalyzed or or two-partreactive adhesives
挤出复合:本页为该章节的标题页,标示本节主题与后续内容的展开方向。
本页以图示为主,源文件仅提取到图题或标题文字「挤出复合」,建议对照原课件图片补充本页要点说明。
热黏性:The bond strength of the seal while still hotCritical for most form-fill-seal machinesDetermines how quickly product can be droppedinto a pouch
常用热封材料:costbond qualityionomer(e.g
本页含表格数据(常用热封材料的成本与封合质量对照,源文件列分隔缺失),源文件缺少行列分隔,表格结构待人工还原。
资料来源:M. Lutterotti, DuPontSealing Mediums ComparedFigure 14. 6
热封参数:本页为该章节的标题页,标示本节主题与后续内容的展开方向。
本页以图示为主,源文件仅提取到图题或标题文字「热封参数」,建议对照原课件图片补充本页要点说明。
foilpolyethylenepoly(ethylene terephthalate)f:oilsealing mediumprinted paperseali
printed polyethylenepolyethyle:Ethylene-vinyl alcoholHigh oxygen barrierpolyethylenepoly(ethylene terephthalate)sealing medium (vinyl)overlacquerSingle-service lidding stockprinted foilExample LaminationsSee Figures 14.
13, 14. 14(For barrier applicationsfoil to the inside)surface printpaperpolyethylenesealing mediumfoilBasic food pouch laminate
CoF is critical:CoF is critical!
本页以图示为主,源文件仅提取到图题或标题文字「CoF is critical」,建议对照原课件图片补充本页要点说明。
VFFS 袋封口比较:Fig. 14. 5Fin seal Lap SealSeals inside surfacesUses more materialDon’t cover UPC! Seals outside to insideBoth surfaces needsealing mediumUse less material
Horizontal Form-Fill-Seal:本页为该章节的标题页,标示本节主题与后续内容的展开方向。
本页以图示为主,源文件仅提取到图题或标题文字「Horizontal Form-Fill-Seal」,建议对照原课件图片补充本页要点说明。
常见卧式袋型:Fig. 14. 5Conventional pouch has three-side sealCan be made into various stand-up designsSome stand-up pouches are pre-made in a separateoperationThree-sidesealed pouchGusseteddesigns
多列成型充填封口:本页为该章节的标题页,标示本节主题与后续内容的展开方向。
本页以图示为主,源文件仅提取到图题或标题文字「多列成型充填封口」,建议对照原课件图片补充本页要点说明。
直立袋示例:本页为该章节的标题页,标示本节主题与后续内容的展开方向。
本页以图示为主,源文件仅提取到图题或标题文字「直立袋示例」,建议对照原课件图片补充本页要点说明。
| 英寸(inch) | 规格号(gauge) | 密耳(mil) | 微米(μm) |
|---|---|---|---|
| 0.001 inch | 100 gauge | 1 mil | 25 μm |
| 0.0005 inch | 50 gauge | 1/2 mil | 13 μm |
数据修正:源文件将微米写作“mm”,按 1 inch = 25.4 mm、0.001 inch = 25.4 μm 的标准换算关系更正为 μm。
早期通用阻隔材料:PVDC is original high universal barrier polymersEVOH laminated between high moisture barrierpolymers can also provide good universal barrierBut not high enough barrier for critical applicationsMetallizing also produces a high universal barrierBut aluminum metallized films are not transparent
高阻隔技术新进展:Monolayer polymerspoly(ethylene naphthalate) ($)liquid crystal polymer ($$$)Multilayered constructionsPET/PA/PETPET/EVOH/PETPET/MXD6/PET/ MXD6/PET
高阻隔技术新进展:Interior coatingsSiOx(glass) coating (Glaskin)AlOxaluminum oxide coatingcarbon coating (DLC and Actis)Exterior coatings and interior laminatesepoxy-amine coating (Sealica and Bairocade)copolyester (Amosorb: interior layer)Nanocompositesextremely fine mineral additions
下载地址:{{downurl}}
{{{a}}}
{{#b}}{{{b}}}
{{/b}} {{/title}} {{#nolog}}登陆注册
{{/nolog}} {{#djsx}}点我刷新
{{/djsx}} {{#gocz}} {{/gocz}} {{#ffqr}} {{/ffqr}}