页数:36页文件大小:445.0 KB来源: 包装技术基础ppt课件
本课件讲解纸与纸板两类最主要的包装材料,从纸的定义、制造工艺、代表性造纸设备讲到纸板结构与性能表征,梳理纸张在包装中的选用依据,适合包装材料课程的材料篇入门学习。
第二单元包装材料和容器:本页为该章节的标题页,标示本节主题与后续内容的展开方向。
本页以图示为主,源文件仅提取到图题或标题文字「第二单元包装材料和容器」,建议对照原课件图片补充本页要点说明。
第3课纸与纸板:本页为该章节的标题页,标示本节主题与后续内容的展开方向。
本页以图示为主,源文件仅提取到图题或标题文字「第3课纸与纸板」,建议对照原课件图片补充本页要点说明。
引言:The “Fourdrinier machine” was the first on the marketand produced a homogenous (single-ply) sheet ofboxboard in various thicknesses.
It was soon joined bythe “Cylinder machine” which formed a multi-layered(multi-ply) type of paperboard. These machines were firstinstalled in the United States around 1830.
代表性造纸机:Fourdrinier MachinesFourdrinier machines (Figure 3. 1) pump furnish from aheadbox directly onto a moving wire screen throughwhich the water is continuously drained.
Fourdriniermachines may have a second headbox (Figure3. 2)situated downstream of the first headbox to addfurther quantities of furnish onto the partially dewateredinitial lay-down.
代表性造纸机:Figure 3. 1 Furnish pours out of the headbox of afourdrinier machine and onto an endless wire orscreen where excess water can be drained. The fibersremain trapped on the screen
代表性造纸机:Figure 3. 2 Paper is dewatered at the wet end of a fourdrinier machine
Cylinder MachinesA cylinder:Cylinder MachinesA cylinder machine (Figure 3. 3) rotates a screendrum in a vat of furnish. (The paper is sometimescalled vat paper.) As the water pours through thescreen, fiber accumulates on the outside of thescreen.
This thin layer of matted fiber is transferred ontoa moving felt belt that passes sequentially over furtherrotating cylinders, each of which deposits another fiberlayer.
代表性造纸机:Figure 3. 3 A single cylinder station on a cylinder-type machine
代表性造纸机:Cylinder machines dewater furnish at the cylinder and paste a thinlayer of fiber against the felt. (Figure 3. 4.)Figure 3.
4 A cylinder machine with six cylinders at whicha paper layer can be formed
代表性造纸机:The fibers of subsequent layers do not intermingle, andtherefore the bond between the layers is weak. The dry end issimilar to that of the fourdrinier machine.
Cylinder machines do not have the fourdrinier machine's limitationon the number of stations, and six-or seven-station machines arecommon.
Higher-caliper boards for folding and setup cartons areusually cylinder boards. Generally, papers are made on fourdrinier or twin-wire formers,whereas heavier paperboard products are made on cylinder-typemachines.
Cylinder boards:Figure 3. 5 Cylinder boards are multiplyboards. An advantage is that the plies can allbe different
代表性造纸机:Twin-Wire MachinesVertiformers and twin-wire formers (Figure 3. 6) inject thefurnish between two moving wire screens. The advantage isthat dewatering takes place on both sides of the paper andis therefore fast.
These machines can produce single andmulti-ply sheets with identical formation at both faces. Machine Direction and Cross DirectionDepositing a fiber-and-water slurry onto a moving wire belttends to align fibers in the direction of travel, known as themachine direction (MD).
The direction across theapermaking machine and across the fiber alignment is thecross direction (CD) (Figure 3. 7). Because of this fiberalignment, paper is an anisotropic material; measuredproperties differ depending on the direction in which theproperty is measured.
代表性造纸机:Figure 3. 6Water can besimultaneouslyremoved fromboth sides ofthe paper on atwin-wire paperformer
代表性造纸机:Figure 3. 7 Fibers in a manufactured paper sheettend to align themselves in the machine direction
代表性造纸机:Figure 3. 8 shows the relationship of tear, stiffness,and fold endurance to machine direction. Paperspecification sheets normally show physical valuesmeasured in both directions.
Package designers needto be aware of paper's directionality. Cylindermachines tend to align fibers more than fourdriniermachines.
Tensile strength ratios in MD and CD for atypical fourdrinier board are about 2:1, whereas for acylinder board the ratio might be 4:1 or higher,meaning that the MD tensile strength is four timesgreater than the CD tensile strength.
代表性造纸机:Figure 3. 8TherelationshipbetweenMD andtear,stiffness,and foldenduranceproperties
代表性造纸机:Cylinder machines tend to align fibers more thanfourdrinier machines. Tensile strength ratios in MD andCD for a typical fourdrinier board are about 2:1, whereasfor a cylinder board the ratio might be 4:1 or higher,meaning that the MD tensile strength is four timesgreater than the CD tensile strength.
The greater thedegree of fiber alignment, the greater the difference in agiven property when measured in MD and CD. The ratioof a property in the two directions is often used as agauge of fiber alignment
代表性造纸机:Surface or Dry-End, Treatments and CoatingsAfter the paper is formed and dried, it is usuallypassed between multiple sets of heavy rolls (Figure 3.
9.). This "calendering" operation has many variations, but theprime objective is to iron and smooth out the surface ofthe paper stock to make it more suitable for printing.
Calendering also compresses the paper sheet, giving adenser product and a glossier surface. Starch is a typical surface sizing used to fill surfacevoids and reduce liquid penetration rate.
代表性造纸机:Figure 3. 9 Calendering consists of passing theformed dried paper between sets of heavy rolls. The paper surface may be dampened to help insmoothing it
代表性造纸机:To meet the highest opacity, gloss, brightness, and printing-detail requirements, papers are coated with pigments such asclay, calcium carbonate, and titanium dioxide.
Coated papers are usually called "clay-coated" regardless ofthe actual formulation. Coated papers are calendered tomaintain a high-quality, smooth surface.
In addition, highly sized and clay-coated boards can bedifficult to bond with water-based adhesive because of poorliquid penetration and the inability of the adhesive to bond tothe underlying fibers.
代表性造纸机:Paper and Moisture ContentPaper is hygroscopic and absorbs and loses moisture according tothe ambient relative humidity (R.
H.) and temperature. The physical properties of paper vary dramatically with moisturecontent, and in some applications the moisture content of the paperduring processing must be controlled.
Because physical characterization values depend on moisturecontent,all paper testing must be done at a precisely controlledtemperature and humidity.
代表性造纸机:Paper/foil laminate Paper/foil laminate Paper/foil laminateat 40% R. H. at 20% R. H. at 80% R. H. Figure 3. 10 Paper's hygroexpansive nature can cause unwantedcurling when paper is bonded to an environmentallystable surface
代表性造纸机:Whenever a paper sheet is laminated to or coated with amaterial that is not affected by moisture (for example,plastic film, aluminum foil, or heavy print or varnish),there is the potential for curling when the humiditychanges.
ViscoelasticityPaper is more or less viscoelastic, depending on the rateat which load is applied. Simply put, the faster a load isapplied, the greater the apparent strength.
Over longloading periods, paper fibers move and distort or "creep."
纸张类型:Paper Types:Newsprint and Related Grades. Book Papers. Commercial Papers. Greaseproof Papers. Natural Kraft Paper. Bleached Krafts and Sulfites.
Tissue Paper. Label Paper. Pouch Papers. Containerboards (linerboard and medium).
纸板等级:Paperboard Grades:Chipboard, Cardboard, Newsboard. Bending Chipboard. Lined Chipboard. Single White-Lined (SWL) Paperboard.
Clay-Coated Newsback (CCNB). Double White-Lined (DWL) Paperboard. Solid Bleached Sulfate (SBS). Food Board. Solid Unbleached Sulfate (SUS).
代表性造纸机:Paperboard CartonsPaperboard provides a versatile and economical material not readilymatched by other packaging mediums.
One significant advantage isthe low tooling cost compared with that for materials such as plastics. Effective paperboard package design is based partly on knowledgeof paper and product properties and partly on craftsmanship and art.
Paperboard packaging can be considered in a number of categories:Folding Cartons. Folding cartons are by far the largest and mostimportant group in paperboard packaging.
代表性造纸机:Figure 3. 11 A gable-top carton blank and an erected gable-top carton
代表性造纸机:Figure 3. 12 A six-cornered Brightwood tray, flat and assembled
The gable-top:The gable-top container(Figure 3. 11) is basically a tube-style carton that has found many applications,particularly for dairy products and fruit juices.
The heavilysized and polyethylene-coated board is erected andheat-sealed at the point of fill. Combibloc and Tetra Pakare similar-appearing proprietary cartons made fromcomplex paper/foil/poly laminates.
A principal applicationis for aseptic beverage packaging such as juice boxes.
固定盒:Setup Boxes. Setup boxes (Figure 3. 13) are rigid cartons that aredelivered erected and ready for filling. Setup boxes are not as amenable to high-speedproduction as folding cartons, and their manufacture, bycomparison, is slow and labor intensive.
Setup boxes are typically constructed from a heavy,low-grade chipboard with no particular folding or printingqualities. In its most elementary form, the board is cut toshape, and the sides folded up and taped with stay tapeto form a stayed box.
示例:Figure 3. 13 Examples of setup box designs
本页以图示为主,源文件仅提取到图题或标题文字「Examples of setup」,建议对照原课件图片补充本页要点说明。
Tubs, Trays:Tubs, Trays, and Liquid-Resistant Boxes. Paperboardcan be formed into round or square tubs with paper endseals. Such forms, constructed from food board, areused to contain such items as ice cream and frozenfoods.
Flat sheets with gusseted corners can be folded toform food trays for frozen entrees or other food products. In most wet food applications, the board is coated witheither polyethylene or wax.
Dual-ovenable paperboardtrays are coated or laminated with an oven-temperature-tolerant plastic such as poly(ethylene terephthalate).
下载地址:{{downurl}}
{{{a}}}
{{#b}}{{{b}}}
{{/b}} {{/title}} {{#nolog}}登陆注册
{{/nolog}} {{#djsx}}点我刷新
{{/djsx}} {{#gocz}} {{/gocz}} {{#ffqr}} {{/ffqr}}