页数:41页文件大小:403.0 KB来源: 包装技术基础ppt课件
本课件系统讲解包装印刷,从印刷的目的与方法分类讲起,展开凸版印刷、胶印、凹版印刷与柔性版印刷的原理与适用范围,并比较三种主流印刷方式的成本与质量差异及印刷油墨特性。
第11课包装印刷:本页为该章节的标题页,标示本节主题与后续内容的展开方向。
本页以图示为主,源文件仅提取到图题或标题文字「第11课包装印刷」,建议对照原课件图片补充本页要点说明。
Relief:Relief : Variations are flexography (commonly referredto as flexo), letterpress, and offset letterpress (commonlyreferred to as dry offset)
印刷方法:Printing presses are variously configured, dependingon the print method and on whether the machine is sheetfed or web fed.
Light materials and those that areextensible or have poor dimensional stability must beweb fed; the material is supplied from a roll and is usuallyrewound into a roll after it is printed.
Web-fed machinestypically run faster, and large runs may be better on aweb-fed machine. Some types of filling machines must be supplied withpackaging material from a roll.
印刷方法:Most papers can be either web or sheet fed, in whichcase other factors must be considered. For instance,corrugated board and other stiff or rigid materials thatcannot wrap around feed rolls must be sheet fed.
While in principle most art can be printed with fourstations, printing presses with eight or more printingstations are not unusual.
The added stations allow theprinter more options and flexibility on how to produceexacting designs of the highest quality.
Plate Production:Plate Production. Modern relief printing plates are made from rubber,photopolymer or occasionally metal, depending on theapplication.
Plates are modest in cost and can be madequickly. Nearly all are made by photographicallyimposing the image recorded on a photonegative onto alight-sensitive material.
In the case of photopolymers, thepolymer hardens where exposed to ultraviolet (UV) lightand remains fluid where unexposed.
凸版印刷:Figure 11. 1 UV light projected through theimage photonegative will cure photopolymer. Uncuredpolymer can be washed away, leaving the raised imageareas
FlexographyIn a typical:FlexographyIn a typical flexographic printing station (see Figure 11. 2)excess ink is applied to an engraved transfer, or aniloxroll.
The engravings on the anilox roll meter the correctamount of ink, depending on the engraving geometry anddepth. The ink is transferred to the raised surfaces of theprinting plate attached to the plate cylinder.
Line artprinting plates have a solid, smooth surface. Halftoneand process printing plate surfaces are composed ofsmall dots standing out in relief.
凸版印刷:Figure 11. 2 A typical flexographic print deck. A chambereddoctor blade ink fountain applies ink to the anilox roll. In othersystems, ink is applied with rolls rotating in the ink fountain
凸版印刷:Flexographic press stations can be arranged inseveral ways. (See Figure 11. 3) The stack press hasindividual color stations stacked one above the other,with drying zones between the stations.
Each platecylinder has its own impression cylinder. The centralimpression (CI) press has printing stations groupedaround a single large central impression drum.
Extensible webs such as polyethylene are best printedon a CI press, because the central impression drumkeeps web distortion to a minimum.
凸版印刷:Figure 11. 3 A six-color flexographic stack press (left) and asix-color flexographiccentral impression (CI) press (right)
凸版印刷:Letterpress and Offset Letterpress (Dry Offset). Letterpress refers to relief printing processes that usehard plastic or sometimes metal printing plates.
Whereflexographic printing inks are fairly fluid and can bemetered with engraved rolls, letterpress inks are heavypastes similar to litho-graphic inks, and must be meteredby a complicated series of rollers.
Cylindrical objects such as two-piece metal cans have nocircumferential register point against which to registerprinting stations.
凸版印刷:Figure 11. 4 Offset letterpress (dry offset) assembles theentire image on a blanket roll and transfers the image to around container in one rotation of the container
凸版印刷:In offset letterpress the inked images from theletterpress printing plates are transferred onto anintermediate resilient rubber blanket roll, where all thecolors can be assembled in complete register.
The heavypaste nature of letterpress inks prevents them fromrunning or spreading while the image is being assembled. The blanket roll is then rolled against the round object,and all the colors that make up the image are transferredat one time and in complete register.
The colors appliedto the blanket are wet and must stay wet until transferredto the container.
胶印:Lithography is a planographic process, meaning thatprinting and nonprinting areas are all on the same plane. Unlike a relief plate, a lithographic printing plate is fiatand smooth.
The mutually exclusive nature of oil and water forms thebasis of modern lithography. Lithographic ink is bydefinition always oil based.
It is a heavy paste and ismetered to the plate cylinder by a train of inking rollers. Another group of rollers applies a thin film of water to thewater-receptive areas. (See Figure 11. 5)
胶印:Figure 11. 5 A lithographic printing station
本页以图示为主,源文件仅提取到图题或标题文字「A lithographic」,建议对照原课件图片补充本页要点说明。
胶印:Most lithographic presses for packaging applicationsare sheet fed, although there are some web-fed presses. The planographic nature of the process requires that thesubstrate surface be reasonably smooth in order to getgood ink transfer.
Lithographic plates can be made with200-line and finer screens, although 133 and 150 aremore common in packaging. Accordingly, the lithographicimage is sharp and has excellent detail.
The edges ofline art are sharp and straight. A unique advantage oflithography not available with the other methods is thatsome color adjustment can be made on-press.
凹版印刷:Gravure printing uses engraved copper-plated steelcylinders to measure and apply patterns of ink to theSubstrate (See Figure 11.
6). In the most commonprocess, a stylus controlled directly by digital informationengraves the desired cell pattern into the cylinder’s softcopper surface.
The cylinder is then chrome plated togive it a hard wear-resistant surface.
凹版印刷:Figure 11. 6 A gravure cylinder may have millions of tinycells, or wells, whose volumecan be controlled to carry different amounts of ink
凹版印刷:Normal gravure printing is always done from rolls andin web form. The entire surface of the gravure cylinder isflooded with a low-viscosity ink and then wiped cleanwith a straight-edged metal doctor blade.
After thecylinder has been wiped, only the ink inside the recessedcell pattern remains on the cylinder. (See Figure 11. 7).
Gravure printing gives superior print quality andunmatched control over long production runs. Make-ready is simple. Since there is no plate joint on a gravurecylinder, it is possible to print continuous patterns.
印刷方式比较:本页为该章节的标题页,标示本节主题与后续内容的展开方向。
本页以图示为主,源文件仅提取到图题或标题文字「印刷方式比较」,建议对照原课件图片补充本页要点说明。
印刷方式比较:本页为该章节的标题页,标示本节主题与后续内容的展开方向。
本页以图示为主,源文件仅提取到图题或标题文字「The printing method」,建议对照原课件图片补充本页要点说明。
印刷方式比较:本页为该章节的标题页,标示本节主题与后续内容的展开方向。
本页以图示为主,源文件仅提取到图题或标题文字「印刷方式比较」,建议对照原课件图片补充本页要点说明。
Stencil or Screen:Stencil or Screen Printing. The term "silk screen",while commonly used, is technically incorrect sincemodern screen printing uses fine metal or plastic screens.
其他包装装潢工艺:The screen is masked off into a pattern that leavesporous screen areas where ink is desired and sealedareas where no ink transfer is indicated.
The screen isplaced against the surface to be printed, and a wiperblade moves an ink puddle across the screen. (SeeFigure 11.
9) Where the screen has been left porous, theink drops through onto the substrate. Stencil screen areeasily and economically made by exposing a screencoated with photosensitive material in a manner similarto that used in lithography and flexography.
其他包装装潢工艺:Figure 11. 9 Screen printing can be doneon flat or round objects.
Reflective Metallics:Reflective Metallics. Only an intact metal surface can provide a reflectiveglossy metallic sheen. In packaging this is done byprinting on aluminum metal foil or aluminum metallizedsurfaces.
The graphic will have a hard, glossy surfaceeven in those areas printed with opaque ink. All glossy reflective metallics are based on aluminum.
Metallizing is a full-web process; metallized designsand patterns are not practical.
Heat-Transfer and Hot-Stamp:Heat-Transfer and Hot-Stamp Printing. Heat-transfer and hot-stamp printing are similar in thatthey both use heat to transfer images from a carrier webto the substrate to be decorated.
They are both cleanprocesses since there are no inks to dry. Both processesrequire a substrate that is reasonably heat tolerant. (SeeFigure 11. 10)
其他包装装潢工艺:Figure 11. 10 Hot stamp printing uses a heated diethat has the image engraved into its surface
Pad Printing:Pad Printing. Pad printing is a relative of gravure printing. The inkedimage is created on an etched flat plate (the cliché) in amanner similar to gravure.
A large, resilient siliconerubber pillow is pressed against the inked cliché. The inkpattern is transferred to the pad, which is subsequentlypressed against the substrate. (See Figure 11. 11).
其他包装装潢工艺:Figure 11. 11 Pad printing is used to decorate irregularly shaped objects. The pad is first pressed against the inked cliché and then moved overand pressed against the object to be printed
Embossing:Embossing. Embossing is the practice of pressing asubstrate, usually paper, so that a design stands out inrelief. A key requirement of embossing is that thesubstrate be capable of deforming under pressure and ofholding the newly created contour.
Embossing dies are made by direct engraving or bycasting from a master engraving. Most embossing isdone in register with a printed pattern already laid downin previous steps.
Web stock can be embossedcontinuously by embossing rolls to impart an overalltexture to the substrate.
Other Decorating and Marking:Other Decorating and Marking Methods. Otherimportant decorating and marking methods for packaginginclude:Gloss coatings.
Printing inks alone do not normally havea high-gloss surface. Clear surface coatings are appliedwhere such an effect is needed.
Ultraviolet-curedcoatings have particularly good surface sheen. Reverse Printing. Clear plastic films are often "reverseprinted," or printed on the back so that the image showsthrough the film.
印刷油墨:A typical printing ink contains the following ingredientclasses:Pigments Ingredients that provide the colorVehicle A resinous component that binds pigmentparticles and adheres them to the substrateSolvents Dissolve resins and fluidize the formula so itwill flow and wet the substrateAdditives Wetting agents, dryers, antioxidants,viscosity control agents, tackifiers, and thelike
下载地址:{{downurl}}
{{{a}}}
{{#b}}{{{b}}}
{{/b}} {{/title}} {{#nolog}}登陆注册
{{/nolog}} {{#djsx}}点我刷新
{{/djsx}} {{#gocz}} {{/gocz}} {{#ffqr}} {{/ffqr}}